Instructions / Assembly

ManualsBrandsEverpure ManualsKitchenKleensteam Twin Steamer Water Filtration System

DESCRIPTION

The Everpure KleenSteam II water ﬁltration system (Figures 1 & 2) represents a total systems

approach to treating water supplied to Foodservice steamers and combi-ovens. It incorporates

elements designed to remove potentially harmful particulates and chlorine from the water,

introduce an advanced scale inhibitor and provide for convenient deliming of any built-up

scale; all in one easy to install and use system. The new dual cartridge KleenSteam II design

provides enhanced performance for low or high ﬂow/capacity steamers with ﬂexibility for

expanding to meet future needs.

READ THESE IMPORTANT POINTS BEFORE INSTALLING THIS KLEENSTEAM II®

SYSTEM:

Always use a minimum 1/2” (3/4” preferred) O.D. copper tubing from the outlet of the 1.

KleenSteam II unit to your steamer.

Use the water from the KleenSteam II unit only on steamer feed and make-up water. DO 2.

NOT USE TO TREAT CONDENSATE COOLING WATER.

Everpure has worked closely with all major foodservice equipment manufacturers to assure 3.

the highest possible degree of compatibility and optimal performance of the KleenSteam II

System with their steamers. To help ensure satisfactory operation, we recommend that you

obtain and read the equipment manufacturer’s operating and maintenance instructions for

your speciﬁc steamer model. Follow the manufacturer’s instructions and procedures for

installation, maintenance and cleaning. Or consult with the manufacturer’s representative

or technical service personnel for guidance regarding any differences between their

directions and those included with the KleenSteam II System. Failure to do so may affect

equipment performance and/or warranty coverage.

INSTALLATION INSTRUCTIONS (SEE FIGURES 3 & 4)

Do not disconnect any existing equipment until you have inspected the contents of the

KleenSteam II unit carton. You should have:

• KleenSteamIIplate-mountedsystemconsistingof:

- Quick-Change ﬁlter header/manifold assembly, Twin Head style

- Cartridge plug in second ﬁlter head (Single System only)

- SR-X Scale Reduction Feeder housing

- Dip Tube for ScaleKleen delimer feed

• 7CB5FilterCartridge(1forSingleSystem;2forTwinSystem)

• (1)ScaleStickSS-10scaleinhibitorcartridge

• (2)ScaleKleen2.2lb.packets

If you do not have these components, do not attempt to install this system! Contact your local

Everpure Master Distributor for assistance.

Shut off power to the steamer.1.

Shut off the inlet water to the steamer at the supply valve.2.

Attach the KleenSteam II header/manifold assembly to a suitable structure in an accessible 3.

location. Mounting holes are provided on the mounting plate. THE KLEENSTEAM II SINGLE

SYSTEMWEIGHS32POUNDSINSERVICE.THEKLEENSTEAMIITWINSYSTEMWEIGHS35

POUNDS IN SERVICE.

Attach the inlet of the KleenSteam II unit to a COLD water supply line only. Hot water may 4.

damage the KleenSteam II unit and will void the warranty. Use a minimum of 1/2” (3/4”

preferred) tubing.

Attach only copper or stainless steel tubing from the outlet of the KleenSteam II unit to the 5.

inlet feed/makeup water connection on your steamer. Keep the tubing run to the steamer

under20feet.DONOTCONNECTTOCONDENSATECOOLINGLINE.

Install7CB5FilterCartridge(s)intothequick-changelterheadsasinstructedonthe6.

cartridge label.

 EV3118-94AAU07

Installation and Operation Guide

KleenSteam II Systems

Manufactured by Everpure

Figure 2 – KleenSteam II Twin Cartridge

Figure 1 – KleenSteam II Single Cartridge

Summary of content (4 pages)

PAGE 1
Installation and Operation Guide KleenSteam II Systems DESCRIPTION The Everpure KleenSteam II water filtration system (Figures 1 & 2) represents a total systems approach to treating water supplied to Foodservice steamers and combi-ovens. It incorporates elements designed to remove potentially harmful particulates and chlorine from the water, introduce an advanced scale inhibitor and provide for convenient deliming of any built-up scale; all in one easy to install and use system.
PAGE 2
7. Unscrew the clear bowl and insert the SS-10 ScaleStick into the center port of the SR-X head. The friction fit between the cartridge and port should allow the cartridge to be suspended while placing the clear bowl over the cartridge and threading it into place on the head. NOTE: The cartridge must be replaced when the level of the white material drops below 1/4” in depth. 8. With the supply water to the KleenSteam II unit off, rotate the inlet valve handle to the open position. 9.
PAGE 3
16. After the second blow down, turn the steamer power switch to the off position, and turn off the inlet water at the valve handle on the KleenSteam II unit. 17. Relieve system pressure by depressing the red relief button on the SR-X head until all air is expelled and water begins to escape. 18. Unscrew the clear bowl and remove the dip tube from the head. BE SURE TO REPLACE THE DIP TUBE IN IT’S HOLDER ON THE BACKPLATE! ,MFFO4UFBN ** 4JOHMF $BSUSJEHF *OMFU '/15 0VUMFU '/15 19.
PAGE 4
Limited Warranty Commercial Water Treatment Equipment You have just purchased one of the finest water treatment units made. As an expression of our confidence in Everpure products, this product is warranted against defects in material and workmanship to the original end-user when installed in accordance with Everpure specifications. The warranty period commences from the date of purchase and is administered as follows: For a period of ONE YEAR Replaceable elements (i.e.