Water Filter User Manual

ManualsBrandsEverpure ManualsWater DispenserQC71

SELECTING A MOUNTING LOCATION

1. Give consideration to the weight of the unit when operating (ﬁlled with water). Operating weights

of the QC7I Systems are:

• Single System - 9 lbs. (4.0 kg.)

• Twin System - 19 lbs. (8.5 kg)

• Triple System - 27 lbs. (12 kg)

• Quad System - 36 lbs. (20 kg)

2. The location should allow for:

• Minimum clearance of 2-1/2” under the cartridge(s) so it can be lowered for removal and

replacement.

• Adequate space for “in” and “out” water line connections.

• Be near a drain for ﬂushing and near a 110V outlet if the accessory (sold separately) Everguard

Low Pressure Alarm is used. See Figures 1-8.

3. If used in conjunction with the SR-X feeder, the SR-X should be mounted after the QC7I Series

Filter and as near the equipment as possible. If possible, keep at least 6” available to the left and

the right of the QC7I System in the event poor quality water conditions require the installation of

the optional Everpure E-Series Preﬁlter.

WARNING: Do not use the MH cartridge in conjunction with the SR-X.

OPERATING SPECIFICATIONS*

Combined Model Name

Replacement

Cartridge Flow Rate Capacity

QC7I Single - MC MC 1.67 gpm (6.3 lpm) 9,000 gal (34,000 L)

QC7I Single - MC

1.67 gpm (6.3 lpm) 9,000 gal (34,000 L)

QC7I Single - MH MH 1.67 gpm (6.3 lpm) 9,000 gal (34,000 L)

QC7I Single - MH

1.67 gpm (6.3 lpm) 9,000 gal (34,000 L)

QC7I Single - TO

TO 1.5 gpm (18.9 lpm) 30,000 gal (113,550 L)

QC7I Single - CV CV 1.67 gpm (6.3 lpm) 7,500 gal (28,390 L)

QC7I Single - XCV XCV 1.67 gpm (6.3 lpm) 10,000 gal (37,850 L)

QC7I Single - XC XC 1.67 gpm (6.3 lpm) 12,000 gal (45,420 L)

QC7I Single - XC

1.67 gpm (6.3 lpm) 12,000 gal (45,420 L)

QC7I Single - 7CB5 7CB5 2.5 gpm (9.4 lpm) 10,000 gal (37,850 L)

QC7I Single - 7CB5-K 7CB5-K 2.5 gpm (9.4 lpm) 10,000 gal (37,850 L)

QC7I Single - 7CB5-S 7CB5-S 2.5 gpm (9.4 lpm) 10,000 gal (37,850 L)

Combined Model Name

Replacement

Cartridge Flow Rate Capacity

QC7I Twin - MC

MC 3.3 gpm (12.6 lpm) 18,000 gal (68,000 L)

QC7I Twin - MC

3.3 gpm (12.6 lpm) 18,000 gal (68,000 L)

QC7I Twin - MH

MH 3.3 gpm (12.6 lpm) 18,000 gal (68,000 L)

QC7I Twin - MH

3.3 gpm (12.6 lpm) 18,000 gal (68,000 L)

QC7I Twin - TO

TO 3.0 gpm (37.8 lpm) 60,000 gal (227,100 L)

QC7I Twin - CV CV 3.3 gpm (12.6 lpm) 15,000 gal (56,780 L)

QC7I Twin - XCV XCV 3.3 gpm (12.6 lpm) 20,000 gal (75,700 L)

QC7I Twin - XC

XC 3.3 gpm (12.6 lpm) 24,000 gal (90,840 L)

QC7I Twin - XC

3.3 gpm (12.6 lpm) 24,000 gal (90,840 L)

QC7I Twin - 7CB5

7CB5 5.0 gpm (18.9 lpm) 20,000 gal (75,700 L)

QC7I Twin - 7CB5-K 7CB5-K 5.0 gpm (18.9 lpm) 20,000 gal (75,700 L)

QC7I Twin - 7CB5-S 7CB5-S 5.0 gpm (18.9 lpm) 20,000 gal (75,700 L)

Figure 1 – Single System

EV3024-87D DE05

Installation and Operation Guide

QC7I Series Water Filters

Manufactured by Everpure

Figure 2 – Twin System

Figure 4 – Quad System

Figure 3 – Triple System

Summary of content (4 pages)

PAGE 1
Installation and Operation Guide QC7I Series Water Filters SELECTING A MOUNTING LOCATION 1. Give consideration to the weight of the unit when operating (ﬁlled with water). Operating weights of the QC7I Systems are: • Single System - 9 lbs. (4.0 kg.) • Twin System - 19 lbs. (8.5 kg) • Triple System - 27 lbs. (12 kg) • Quad System - 36 lbs. (20 kg) 2. The location should allow for: • Minimum clearance of 2-1/2” under the cartridge(s) so it can be lowered for removal and replacement.
PAGE 2
Capacity 36,000 gal (136,000 L) 36,000 gal (136,000 L) 36,000 gal (136,000 L) 36,000 gal (136,000 L) 120,000 gal (454,200 L) 30,000 gal (113,550 L) 40,000 gal (151,400 L) 48,000 gal (181,680 L) 48,000 gal (181,680 L) 40,000 gal (151,400 L) 40,000 gal (151,400 L) 40,000 gal (151,400 L) Temperature: 35-100°F (2-38°C) Pressure: 10 - 125 psi (0.7 - 8.6 bar), non-shock For cold water use only. 40 60 EVERPURE PSI PSI 12 0 0 Replacement Combined Model Name Cartridge Flow Rate QC7I Quad - MC MC 6.
PAGE 3
CARTRIDGE CHANGE DETERMINATION Replace cartridges when capacity is reached, or when ﬂow becomes inadequate, but at least annually. All cartridges on multiple cartridge systems should be changed at the same time. The Everpure Pressure Gauge or Everguard Low Pressure Alarm provides a quick and simple means of determining when the ﬁlter cartridge(s) should be changed. Installed on the outlet port of the ﬁlter, the gauge or Everguard LPA can be used to measure both dynamic (ﬂowing) and static (line) pressure.
PAGE 4
REPLACEMENT PARTS Contact your local Everpure dealer for ﬁlter cartridges or system replacement parts. Description Part Number Outlet pressure gauge Inlet pressure gauge (quad system only) EV3114-09 EV3114-09 EV3114-07 EV3114-07 Inlet valve (twin, triple & quad) Flushing valve System Tested and Certiﬁed by NSF International against NSF/ANSI Standards 42 and 53 for the reduction of: Standard No.