User's Manual

Loading the Batteries

1. Remove the power cavity from the rear of the Monitor. (Fig. 10)

Fig. 10

2. Open the battery compartment cover and fit 4 AA-size batteries, following

+ and – signs as indicated on the inside battery compartment. (Fig. 10)

3. Close the battery compartment cover and refit the power cavity in place.

(Fig. 10)

Using the AC Adaptor

Plug one end of the provided power adaptor into a wall outlet and the other end

into the side of Monitor. (Fig. 11)

Fig. 11

Installing the Monitor

3 types of installation can be made, such as wall mount, table stand and hang

up by string.

Wall Mounting the Monitor

1. Decide on the appropriate mounting location. Drill two holes 48mm apart in

a line and fit wall plugs. (Fig. 12)

2. Insert fixing screws until almost fully home and hang the Monitor ove r

these screws using the two keyhole slots in the rear of the Monitor. (Fig.

12)

Fig. 12

Table standing the Monitor

The Monitor has the swiveling pivot which allows flexible angle adjustment for

table standing installation.

1. Adjust the swiveling pivot to an appropriate angle for best viewing

condition. (Fig. 13)

Note: To meet various applications, the angle of swiveling pivot can attain

80°, 50° or 20°.

2. Place the Monitor to an ideal location.