User's Manual

Press to save and exit, or
Press to exit without saving.
TIME & DATE SETUP
Scroll through the menu until ‘2-13 TIME & DATE
SETUP’ is displayed and press .
Note: After configuring the Time and Date press
to return to the top level programming menu.
DATE
Scroll through the menu until ‘2-13-1 Date’ is displayed.
The current setting will also be displayed.
To change the setting press .
Enter the date in the format ‘dd/mm/yy’.
Press to save and exit, or
Press to exit without saving.
TIME
Scroll through the menu until ‘2-13-2 Time’ is
displayed. The current setting will also be displayed.
To change the setting press
Enter the time in the format ’hh:mm:ss’.
Press to save and exit, or
Press to exit without saving.
ZONE SETUP
Scroll through the programming menu until ‘3. ZONE
SETUP’ is displayed and press .
Enter the zone number to be configured and press
.
The following configuration options are based upon
configuring zone 1. Options for all other zones (2-10)
are identical except the zone number reference will
change according to the zone being configured.
Note: After completing the Zone Setup press
to return to the top level programming menu.
23
3. ZONE SETUP:
Enter Zone (1-10)
3-1 Zxx Name
xxxxxxxxxxxxxx
3-2 Zxx Type
xxxxxxxxxxxxxx
3-4 Zxx Chime
xxxx
3-6 Zxx
PART
-
ARM 1: XXX
3-8 Zxx Walk
Through: xxx
Panic/PA
Intruder
24 hour Intruder
Fire
Tes t
Select
ON
->
＊
OFF
->
＃
Select
ON
->
＊
OFF
->
＃
OFF
Slave
Master
3-3 Zxx Final
Exit Set: xxx
Select
ON
->
＊
OFF
->
＃
3-7 Zxx
PART
-
ARM 2: XXX
3-5 Zxx ENTRY
DELAY: XXX XXX
Select
ON
->
＊
OFF
->
＃
3-5-1 Status
xxx
3-5-2 Delay Time
Enter (10
-
250s)
Enter (10-250s)
Select
ON
->
＊
OFF
->
＃
No name
Front door
Back door
Patio door
Dining room
Living room
Lounge
Kitchen
Shed
Garage
Hall
Landing
Upstairs
Downstairs
Bedroom 1
Bedroom 2
Bedroom 3
Bedroom 4
Windows 1
Windows 2
Windows 3
PIR Detector
Magnetic Contact
FIRE/SMOKE
Panic/PA
PROGRAM MODE
Code: