User's Manual

ManualsBrandsEverspring Industry ManualsElectronicsWireless remote control

Wireless Remote Controller TAC35-0

Installation and Operating Instructions

TAC35-0 Remote

Overview:

TAC35-0 Remote—each of your customer service stations has one of these remote

units to signal that the station is ready for the next customer. Wireless

communication allows them to be installed and moved from location to location with

no wiring hassles. The remote comes in a kit of:

1. One of USB dongle

2. Five of TAC35-0 Remotes

3. One of Configuration application software

The TAC35-0 Remote consists of:

Range: 30 ft / 10m indoors; 100 ft / 30m outdoors

Frequency: 908.42 MHz (US / Canada)

or 868.42 MHz (Europe)

or 921.42 MHz (Australia / New Zealand)

Power: AC adapter or 4 AA batteries

Queue control capacity: 3

Available Functions: Next, Repeat, Unavailable

Setting Up TAC35-0 Remote

1. Open the configuration application in the computer.

2. Go Station Window to start setting for TAC35-0 Remote

3. This window sets the major characteristics of each Remote—it pairs the serial

number of the TAC35-0 Remote with a station entry and sets the name of the

TAC35-0 Remote, sets the action of each of the remote’s buttons, and sets the

voice files that say the remote’s name. This page manages the following settings

for each remote using three tabs:

Summary of content (4 pages)

PAGE 1
Wireless Remote Controller TAC35-0 Installation and Operating Instructions TAC35-0 Remote Overview: TAC35-0 Remote—each of your customer service stations has one of these remote units to signal that the station is ready for the next customer. Wireless communication allows them to be installed and moved from location to location with no wiring hassles. The remote comes in a kit of: 1. One of USB dongle 2. Five of TAC35-0 Remotes 3.
PAGE 2
A. The Learn Tab allows you to create and name a station entry for each remote in the primary and secondary languages, and pair the serial number of the remote. B. C. The Set-Up Tab sets up the action performed by the remote’s buttons. The Voice Files Tab sets up voice files to say a remote’s name in the primary and secondary languages. You may also enter Dual Voice files. These allow the application to use two voices for customer messages.
PAGE 3
10. Select the Set-up tab. For 3-button and 6-button remotes, this tab allows you to associate each Fn key (F1, F2, or F3) with a queue. For a 1-button remote, program F1 key settings only. If you entered 1 in the Number of Queues on the Basic Window, you may only set up the F1 key. If you entered 2 in the Number of Queues on the Basic Window, you may set up two of the Fn keys. If you entered 3 or more in the Number of Queues on the Basic Window, you may set up all of the Fn keys. 11.
PAGE 4
is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.