Use and Care Manual
Table Of Contents
- Preface
- 1 Scope
- 2 Reference publications
- 3 Definitions and abbreviations
- 4 Design requirements
- 4.1 Supply fittings
- 4.2 Servicing
- 4.3 Installation
- 4.4 Threaded connections
- 4.5 Connections other than threaded connections
- 4.6 Accessible designs
- 4.7 Backflow prevention
- 4.8 Cover plates and escutcheons
- 4.9 Toxicity and lead content
- 4.10 Frost-proof faucets and hydrants
- 4.11 Showerheads, body sprays, and hand-held showers
- 4.12 Cross-flow
- 4.13 Fittings incorporating electrical features
- 4.14 Materials
- 4.15 Automatic compensating valve temperature control
- 4.16 Lawn faucets
- 4.17 Flexible water connectors
- 4.18 High-efficiency commercial pre-rinse spray valves
- 4.19 Household hot water dispensers with storage electrical heating systems
- 5 Performance requirements and test procedures
- 5.1 General
- 5.2 Coatings
- 5.3 Pressure and temperature
- 5.4 Flow rate
- 5.5 Operating requirements
- 5.6 Life cycle
- 5.7 Resistance to installation loading
- 5.8 Resistance to use loading
- 5.9 Backflow prevention
- 5.10 Lawn faucets
- 5.11 Alternative materials test
- 5.12 High-efficiency showerheads and hand-held showers
- 5.13 High-efficiency commercial pre-rinse spray valves
- 6 Markings, packaging, and installation instructions
- Annex A (informative) Unit conversion and rounding criteria
- Annex B (normative) Tests by fitting type
ASME A112.18.1-2018/CSA B125.1-18 Plumbing supply fittings
July 2018 © 2018 Canadian Standards Association
23
1023-1979
Hot Water Dispensers Household Storage Type - Electrical
1061-2006
Removable & Non-Removable Push-Fit Fittings
ASTM International (American Society for Testing and Materials)
B117-07a
Standard Practice for Operating Salt Spray (Fog) Apparatus
B368-97(2003)e1
Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B380-97(2008)e1
Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote
Procedure
B571-97(2008)e1
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
D968-05e1
Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D3359-09e2
Standard Test Methods for Measuring Adhesion by Tape Test
E29-08
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
F2324-13
Standard Test Method for Pre-rinse Spray Valves
G85-02e1
Standard Practice for Modified Salt Spray (Fog) Testing
ISA (Instrumentation, Systems, and Automation Society)
ANSI/ISA-75.02-2008
Control Valve Capacity Test Procedures
MC96.1-1982
Temperature Measurement Thermocouples
ISO (International Organization for Standardization)
228-1:2000
Pipe
threads where pressure-tight joints are not made on the threads — Part I: Dimensions, t
olerances
and
designation
NSF International
NSF/ANSI 61-2017
Drinking Water System Components — Health Effects