Installation Condition 1. Check the Accessories List to verify that all parts are complete in this package. 2. Do not disassemble the main body by yourself. 3. Connect inlet pipes to supply valves. 4. Make sure inlet pipes and supply valves have been installed and cleaned, with no impurities in the pipeline. 5. After installation, check all joints for leakages. 8. Do not leave the rain shower system exposed to a severely corrosive environment.
Model: 5437 Bathtub Faucet Standard Part List NO Part Name Quantity ry 1 Faucet Body 1 2 Brass Parr 1 X 3 Sauce: Body Gasket 1 4 Mounting Nut 1 A 5 Hand Shaker 1 a Hand Pedestal 1 7 Pedestal Gasket 2 8 Mounting Nut 1 9 Handle 2 0 Decorative Seat 3 14 Transforms Control Naive 1 HE 12 San tee! Water Bog: 2 13 Hand Connect Hose 3 14 Shower Hose 1 15 construction Manual 1 18 Hot And Cold Hose 2 17 Shower Connect 1 ose Connection Travel
Bathing Faucet Installation Step 1 Vv Connect Brass Part @ with Faucet Body O and put the Brass Partial through the basin hole Install Faucet Body Gasket 3 and Mounting Nut @ in sequence and tighten the nut with a wrench. P supermodel Modeler u pet & a Shower seat > fixing assembly NC onto ter ty Control Water ody | dh \ta moms Control naive 4 \attorneys Contra: Valve " Interpol Water Body “Contd Water Bic Remove the Decorate Seats © and put them on the bathtub hole: Control Valve 8 and Control Water Bodies
Malathion Faucet Installation Pleb 2 Install Hot and Cold Hoses 1 as the above drawings. Connect one side of Hot and Cold Hoses @ with Transforms Control Valve i, the other side to Contra! Water Bodies d3. Left is to hot water, right is to cold water. Ona side of Shower HBase connected to Hand Shower, the other aids is connected to the Shower Connect® through Hand Pedestal © Then the either side of Shower Connect © is connected to Transforms Control Valve Gb.
Basin Faucet Application instruction 1:Operating handle gradually is better for valve protection. 2:The handles turn right or left is to open or close. The larger the rotation angle, the larger the flow rate. Conversely, the smaller the rotation angle, the smaller the flow rate. Mixed warm water when the cold water handle and the hot water handle are opened at the same time.
Care and Maintenance Do's 1. In order to keep the mixer surface bright, please clean the mixer regularly. 2. Rinse faucet with clean water and wipe it with fast cotton cloth. 3. Use one of the following cleaners to remove dirt on the surface: a. Mild liquid cleaner. b. Colorless glass cleaner and powder cleaner which does not cause abrasion and can be dissolved completely. c. Polish liquid which does not cause abrasion. Don'ts a.
