Material Safety Data Sheet

ManualsBrandsEverWatt ManualsLED Bulbs200W LED Corn Light Bulb, 1000W Equivalent, Large Mogul E39 Base, 29189 Lumens, 5000K, IP64 Waterproof Outdoor Indoor Area Lighting, Replacement for Metal Halide HID, CFL, HPS

GHS Safety Data Sheet (SDS)

Section 1: Manufacturer & Contact Information

Manufacturer: EverWatt Lights

Address: 5221 Central Ave. #5 Richmond, CA 94804, United States

Email: Info@EverWattlights.com

Phone: 510-730-0062

Website: www.EverWattlights.com

In emergency situations contact local authorities.

Section 2: Product Identification

Product identifier/Product Name:EverWatt Self-ballasted, Light-emitting-diode

Type (E485355)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-027W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-036W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-054W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-054W-XA2Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-075W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-095W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-180CB-115W-XA1Y (a)

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-B-030W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-B-040W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-B-050W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-B-060W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-B-080W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-T-030W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-T-040W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-T-050W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-T-060W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-AB-01-T-080W-X-Y-Z-aaK [c]

Self-Ballasted Lamps, LED type, Model(s) EW-CB52-030W-X1Y-Z [b]

Self-Ballasted Lamps, LED type, Model(s) EW-CB52-040W-X1Y-Z [b]

Self-Ballasted Lamps, LED type, Model(s) EW-CB52-054W-X1Y-Z [b]

Self-Ballasted Lamps, LED type, Model(s)EW-CBW05-030W-X1Y-Z[&]

Self-Ballasted Lamps, LED type, Model(s)EW-CBW05-040W-X1Y-Z[&]

Self-Ballasted Lamps, LED type, Model(s)EW-CBW05-054W-X1Y-Z[&]

EverWatt

www.EverWattlights.com Tel: (510)730-0062 Email: Info@EverWattlights.com

Preparation Date: 06/03/2014 Revision Date: 03/02/2018

Format: GHS Language: English (US) WHMIS, OSHA HCS 2012

Summary of content (10 pages)

PAGE 1
GHS Safety Data Sheet (SDS) Section 1: Manufacturer & Contact Information Manufacturer: EverWatt Lights Address: 5221 Central Ave. #5 Richmond, CA 94804, United States Email: Info@EverWattlights.com Phone: 510-730-0062 Website: www.EverWattlights.com In emergency situations contact local authorities.
PAGE 2
Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Se
PAGE 3
Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Self-Ballasted Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, Lamps, LED LED LED LED LED LED LED LED LED LED LED LED EverWatt www.EverWattlights.
PAGE 4
Section 3: Hazard Identification There are no substances contained within an LED lamp that would cause the lamp to be classified as hazardous waste or universal waste. EverWatt LED fixtures are electronic devices. When used as intended, do not have any special health or safety hazards.
PAGE 5
Section 3: Hazard Identification (Continued) 3.5. Signal Word: Not Applicable 3.6. Hazard Statement: This article is essentially inert under most conditions including those most likely to be present in a fire or other emergency situation. 3.7. Pictograms: Not Applicable 2.8. Precautionary Statement: This product is an electrical device that when used in or along with appropriate equipment designed for those products and constructed for use with such products, has no special health or safety concerns. 3.9.
PAGE 6
Section 4: Physical Properties & Lamp Composition Physical Properties: Not applicable to an intact lamp. These items are light bulbs in various shapes, configurations, and designs. All contain solid-state light emitting diodes (LEDs) as the light-generating source. These LEDs are contained in various enclosure types and shapes that may be constructed of aluminum, glass, plastic, or a combination of these materials. Some products also contain circuitry to energize the LEDs.
PAGE 7
Section 5: First Aid Measures Not applicable to intact lamps during normal use and operation. Section 6: Fire Fighting Measures Not applicable to an intact lamp. Under extreme heat the outer glass (or plastic) envelope may melt or crack, No special precautions necessary for firefighters. Section 7: Accidental Release Measures Not applicable to an intact lamp. Breakage of the lamp may result in exposure to electrical shock hazards if the lamp is still installed in a fixture.
PAGE 8
Section 8: Lamp Disposal Procedures Normal precautions should be taken for the collection of glass particles in the event a lamp is broken. Waste Disposal Method: These lamps do not contain any materials that would subject them to special waste disposal requirements. Before disposing of waste lamps, check with federal, state, and/or local officials for current guidelines and regulations. EverWatt encourages recycling of its products through qualified lamp recycling facilities.
PAGE 9
Section 11: Stability and Reactivity Not applicable to intact lamps. Section 12: Toxicological and Health Information There are no known toxicological health hazards from exposure to lamps that are intact. If the lamp is broken and bare LEDs are exposed and still operating, do not look directly into a bare LED for any extended period-of-time or extreme eye discomfort can temporarily occur due to very high chip brightness.
PAGE 10
13.1. Preparer: EverWatt Lights, Technical and Compliance Department 13.2. Disclaimer: The information contained in this Material Safety Data Sheet is supplied in conformity with 29 CFR 1910.1200 of the OSHA Hazard Communication Standard. The information set forth herein is presented in good faith and believed to be correct. No representations are made as to the completeness or accuracy thereof.