E006-00-000062
Table of contents Overview Overview ....................................................................................................... 2 Hardware Installation ................................................................................... 3 Quick Start .................................................................................................... 3 Hardware Installation Details .......................................................................
Folding@EVGA: 5. Align your new card with the appropriate slot, (see illustration below) and press it in firmly until the card is fully Distributed computing for the greater good. Did you know that you can turn your graphics card into a shared supercomputer? For more information please visit www.evga.com/folding. 6. Connect the supplemental PCI Express (PCI-E) power adapter(s) to the card if applicable. (See illustration seated.
SLI Installation (optional) NOTE: If adding a secondary card to an existing PC, you may be required to REINSTALL the driver again. On some EVGA graphics cards, it is possible to link multiple graphics cards together for improved performance, this is called SLI. To install multiple cards in SLI, follow the below instructions, please note that in SLI setups both cards must be the same model. For a video overview of setting up SLI, please visit www.evga.com/slivideo.
Quick Fixes Problem: When viewing my PC on an HDTV, the entire desktiop is not visible, and certain areas; such as the Windows taskbar, reside offscreen. Problem: At boot-up, all you hear is a series of beeps from the computer, but see no image on the screen. Solution: Firstly, ensure that you are running at the correct resolution for your display. If it is, try adjusting the “Resize Desktop” feature. This lets you compensate for HDTV overscan so that the entire desktop is visible.
MEMO Compliance Information FCC Compliance Information This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
MEMO 11 MEMO 12
