EVGA X58 SLI Micro Motherboard Table of Contents 8VHU¶V *XLGH .................................................................................................................1 EVGA X58 SLI Micro Motherboard ...............................................................................1 %HIRUH
8-pin ATX 12V Power (PW12) ....................................................................... 23 Connecting Serial ATA Cables........................................................................... 23 Connecting Internal Headers ............................................................................. 24 Front Panel Header ........................................................................................ 24 IEEE1394a (Firewire) ..............................................................
EVGA X58 SLI Micro Motherboard Hard Disk Boot Priority ....................................................................................... 43 CD-ROM Device Priority .................................................................................... 43 First/Second/Third Boot Device ......................................................................... 43 Boot Other Device .............................................................................................. 44 Boot Up NumLock Status .......
INT Pin 1/2/3/4/5/6/7/8 Assignment ................................................................... 54 Maximum Payload Size ...................................................................................... 54 PC Health Status Menu.......................................................................................... 55 SmartFan Function ............................................................................................. 56 Frequency/Voltage Control Menu ..................................
EVGA X58 SLI Micro Motherboard List of Figures Figure 1. EVGA X58 SLI Micro Motherboard Layout .......................................... 14 Figure 2. Chassis Backpanel Connectors ........................................................... 15 Figure 3. PWR1 Motherboard Connector ............................................................ 22 Figure 4. BIOS CMOS Setup Utility Main Menu .................................................. 35 Figure 5. Standard CMOS Features Menu .....................
%HIRUH
EVGA X58 SLI Micro Motherboard 9
EVGA X58 SLI Micro Motherboard Thank you for purchasing the EVGA X58 SLI Micro Motherboard. This motherboard offers enthusiast performance and when combined with two SLI-Ready NVIDIA® GeForce® graphics cards, you get innovative NVIDIA® SLI® technology for enhanced system performance. Motherboard Specifications Size: MATX form factor of 9.6 inch x 9.
EVGA X58 SLI Micro Motherboard Six(6) onboard Serial ATA II 300MBps data transfer rate Six Serial ATA II connectors from south bridge with support for RAID 0, RAID 1, RAID 10, and RAID 5 Supports hot plug and NCQ (Native Command Queuing ) Onboard LAN Integrated LAN port Supports 10/100/1000 Mbit/sec Ethernet Onboard IEEE1394a (Firewire) Support hot plug Two IEEE1394a ports (two onboard headers) with a rate transmission of 400 Mbps Onboard Audio Realtek High-Definition audio Supports 8-
Unpacking and Parts Descriptions Unpacking The EVGA X58 SLI Micro Motherboard comes with all the necessary cables for adding a motherboard to a system case. If replacing a motherboard, you may not need many of these cables. All parts shipped in this kit are RoHS-compliant (lead-free) parts. Equipment The following accessories are included with the EVGA X58 SLI Micro Motherboard.
18 17 16 14 15 15 4 19 20 13 12 11 4 1 10 2 9 3 8 8 7 5 21 6 1. CPU Socket 1366 9. 2. Intel X58 Chipset 10. IEEE1394a Connector USB Headers 3. DDR3 DIMM Slots 1 ± 6 11. Clear CMOS Button 19. CPU Fan Connector 4. Fan Connectors 12. Power Button 20. 8-pin ATX_12V Power Connector 21. Motherboard Battery 5. 24-Pin ATX Power Connector 13. Reset Button 6. Intel ICH10R Chipset 14. PCI slot 7. Serial-ATA (SATA) Connectors 15. PCI Express 2.0 Slots 8. Front Panel Connector 16.
EVGA X58 SLI Micro Motherboard 1 3 2 4 5 2 2 6 2 1. PS/2 Keyboard Port 2. USB 2.0 Ports (Eight) 3. Coaxial SPDIF Output 4. Optical SPDIF Output 5. LAN Port with LEDs to indicate status: Activity LED Status Off Blinking (Green) 6. Audio Port Blue Green Pink Orange Black Grey 2-Channel Line-In Line-Out Mic In Figure 2.
Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: Preparing the motherboard Installing the CPU Installing the CPU fan Installing the memory Installing the motherboard Connecting cables Safety Instructions To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Preparing the Motherboard Installing the CPU Be very careful when handling the CPU. Hold the processor only by the edges and do not touch the bottom of the processor. Use the following procedure to install the CPU onto the motherboard: Unhook the socket lever by pushing down and away from the socket. Put your finger on the tail of the load plate and press down with light pressure to lift the load plate up. Lift the load plate.
Align the notches in the processor with the notches on the socket. Lower the processor straight down into the socket with out tilting or sliding it into the socket Note: Make sure the CPU is fully seated and level in the socket. Close the load plate over the CPU and press down while you close and engage the socket lever. Align notches with notches on the CPU The CPU installation is complete. Installing the CPU Fan There are many different fan types that can be used with this motherboard.
Installing System Memory (DIMMs) Your new motherboard has six 240-pin slots for DDR3 memory. These slots support 256 MB, 512 MB, 1GB, 2GB, 4GB DDR3 technologies. There must be at least one memory bank populated to ensure normal operation. Use the following the recommendations for installing memory. (See Figure 1 on page 14 for the location of the memory slots.) One DIMM: If using 1 DIMM (Single Channel), install into: DIMM slot 1.
Installing the Motherboard The sequence of installing the motherboard into a system case depends on the chassis you are using and if you are replacing an existing motherboard or working with an empty system case. Determine if it would be easier to make all the connections prior to this step or to secure the motherboard and then make all the connections. It is normally easier to secure the motherboard first. Use the following procedure to install the I/O shield and secure the motherboard into the chassis.
Securing the Motherboard into a System Case Most system cases have a base with mounting studs or spacers to allow the motherboard to be secured to the chassis and help to prevent short circuits. If there are studs that do not align with a mounting hole on the motherboard, it is recommended that you remove that stud to prevent the possibility of a short circuit. In most cases, it is recommended to secure the motherboard using a minimum of nine (9) spacers and screws. 1.
USB 2.0 Expansion slots CMOS Clear Button 24-pin ATX Power (PW1) PW1 is the main power supply connector located along the edge of the board next to the DIMM slots. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure. PW1 connector Plug power cable from system power supply to PW1 Figure 3. PW1 Motherboard Connector Table 1.
8-pin ATX 12V Power (PW12) PW12, the 8-pin ATX 12V power connection, is used to provide power to the CPU. Align the pins to the connector and press firmly until seated. Connecting Serial ATA Cables The Serial ATA II connector is used to connect the Serial ATA II device to the motherboard. These connectors support the thin Serial ATA II cables for primary storage devices. The current Serial ATA II interface allows up to 300MB/s data transfer rate.
Connecting Internal Headers Front Panel Header The front panel header on this motherboard is one connector used to connect the following four cables. (see Table 2 for pin definitions): PWRLED Attach the front panel power LED cable to these two pins of the connector. The Power LED indicates WKH V\VWHP·V status. When the system is turn on status, the LED is on. When the system is turn off status, the LED is off. When the system is in S1, S1, S3, S4 status, the LED will blink.
IEEE1394a (Firewire) This motherboard has two (2) IEEE 1394a onboard headers. Alternatively, you can also connect these to your system case (if applicable) 1. Secure the bracket to either the front or rear panel of the system case (not all system cases are equipped with the front panel option). Connect the end of the cable(s) to the IEEE1394a headers on the motherboard. Table 3.
USB Headers This motherboard contains eight (8) USB 2.0 ports that are exposed on the rear panel of the chassis (Figure 2). The motherboard also contains two 10-pin internal header connectors onboard that can be used to connect an optional external bracket containing four USB 2.0 ports. 1. Secure the bracket to either the front or rear panel of your chassis (not all chassis are equipped with the front panel option). 2. Connect the end of the cable to the USB 2.0 header on the motherboard. Table 4.
Audio The audio connector supports HD audio standard and provides two kinds of audio output choices: the Front Audio, the Rear Audio. The front Audio supports re-tasking function. Table 5.
Fan Connections There are six fan connections on the motherboard. The fan speed can be CPU Fan detected and viewed in the PC Health Status section of the CMOS Setup. The fans are automatically turned off after the system enters S3, S4 and S5 mode. CPU Fan Ground +12V Sense Control Note: the CPU fan cable can be either a 3-pin or a 4-pin connector. Connect a 3-pin connector to pins 1, 2, and 3 on the motherboard connector.
Expansion Slots The EVGA X58 SLI Micro Motherboard contains four (4) expansion slots, two (2) PCI Express slots and two (1) PCI slot. For a full list of PCI Express graphic cards supported by this motherboard, visit: www.EVGA.com/Products 4 3 2 1 Slot Listing 1 ± PCI-E 2.0 x16 - Slot 1 (Primary) 2 ± PCI-E x1 - Slot 1 3 ± PCI-E 2.
PCI Slots The PCI slot supports many expansion cards such as a LAN card, USB card, SCSI card and other cards that comply with PCI specifications. When installing D FDUG LQWR WKH 3&, VORW EH VXUH WKDW LW LV IXOO\ VHDWHG 6HFXUH WKH FDUG·V PHWDO bracket to the chassis back panel with the screw used to hold the blank cover. PCI Express x1 Slots There is one PCI Express x1 slot that is designed to accommodate PCIe 1x cards, such as a Killer Xeno Network Card or Sound Card.
Onboard Buttons These onboard buttons include RESET, POWER and Clear CMOS. These functions allow you to easily reset the system, turn on/off the system, or clear the CMOS. RESET and POWER Button These onboard buttons allow you to easily turn on/off the system. These buttons allow for easy debugging and testing of the system during troubleshooting situations. The POWER button with LED indicates WKH V\VWHP·V VWDWXV :KHQ WKH V\VWHP is powered on, the LED remains a solid green.
Post Port Debug LED and LED Status Indicators Post Port Debug LED Provides two-digit POST codes to show why the system may be failing to boot. It is useful during troubleshooting situations. This Debug LED will also display current CPU temperatures after the system has fully booted into the Operating System. Debug LED with CPU Temperature Monitor LED Status Indicators 7KHVHV /('V LQGLFDWH WKH V\VWHP·V VWDWXV POWER LED (Green): When the System is powered on: This LED is on.
Configuring the BIOS This section discusses how to change the system settings through the BIOS Setup menus. Descriptions of the BIOS parameters are also provided.
Enter BIOS Setup The BIOS is the communication bridge between hardware and software. Correctly setting the BIOS parameters is critical to maintain optimal system performance. Use the following procedure to verify/change BIOS settings. 3. Power on the computer. 4. Press the Del key when the following message briefly displays at the bottom of the screen during the Power On Self Test (POST). Press F1 to continue, DEL to enter Setup. Pressing Del takes you to the Phoenix-Award BIOS CMOS Setup Utility.
Configuring the BIOS Phoenix ± AwardBIOS CMOS Setup Utility ` Standard CMOS Features ` Frequency/Voltage Control ` Advanced BIOS Features Load Defaults ` Integrated Peripherals Set Supervisor Password ` Power Management Setup Set User Password ` PnP/PCI Configurations Save & Exit Setup ` PC Health Status Exit Without Saving Esc : Quit F10 : Save & Exit Setup : Select Item Time, Date, Hard Disk Type.., Figure 4.
Frequency/Voltage Control Use this menu to optimize system performance and configure clocks, voltages, memory timings, and more. The following items on the CMOS Setup Utility main menu are commands rather than submenus: Load Defaults Load defaults system settings. Set Supervisor Password/Set User Password Use this command to set, change, and disable the password used to access the BIOS menu. Save & Exit Setup Use this command to save settings to CMOS and exit setup.
Configuring the BIOS Standard CMOS Features Menu The Standard CMOS Features menu is used to configure the standard CMOS information, such as the date, time, HDD model, and so on. Use the Page Up and Page Down keys to scroll through the options or press Enter to display the sub-menu. Use the arrow keys to position the selector in the option you choose. To go back to the previous menu, press Esc. The information shown in Item Help corresponds to the option highlighted.
Date and Time Using the arrow keys, position the cursor over the month, day, and year. Use the Page Up and Page Down keys to scroll through dates and times. Note that the weekday (Sun through Sat) cannot be changed. This field changes to correspond to the date you enter. Note that the hour value is shown in a 24-hour clock format. Time is represented as hour : minute : second.
Configuring the BIOS IDE Auto-Detect [Press Enter] Extended IDE Drive Access Mode [None} Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector 0 0 0 0 0 39
Press Enter to auto-detect IDE and SATA channels in the system. Once the channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are automatically filled in. None There is no HDD installed or set. Auto The system can auto-detect the hard disk when booting up. Manual When you set the channel to [Manual] and change Access Mode to [CHS], you can then enter the number of cylinders, heads, Precomp, landing zone, and sector.
Configuring the BIOS Halt On Halt On determines whether or not the computer stops if an error is detected during power on. Use the Page Up and Page Down keys to scroll through the options or press Enter to display the Halt On sub-menu. Use the arrow keys to position the selector in the option you choose. Press Enter to accept the changes and return to the Standard CMOS Features menu. Halt On [All , But Keyboard] All Errors Whenever the BIOS detects a nonfatal error, the system stops and prompts you.
Advanced BIOS Features Access the Advanced BIOS Features menu from the CMOS Utility Setup screen. Use the Page Up and Page Down keys to scroll through the options or press Enter to display the sub-menu. Use the arrow keys to position the selector in the option you choose. To go back to the previous menu, press Esc. The options that have associated sub-menus are designated by a `, which precedes the option. Press Enter to display the sub-menus.
Configuring the BIOS Note: That all data in white is for information only, data in yellow is changeable, data in blue is non-changeable, and data in a red box is highlighted for selection. Hard Disk Boot Priority Use this option to select the priority for HDD startup. Press Enter to see the list of bootable devices in your system. Use the arrow keys to go to the various devices. Then use the + or ± keys to move the device priority up or down in the list. To go back to the previous menu, press Esc. 1.
First Boot Device Removable Hard Disk CDROM Legacy LAN Disabled :Move ..... ..... ..... ..... ..... ENTER:Accept [ [ [ [ [ ] ] ] ] ] ESC:Abort Boot Other Device With the option set to Enable, the system boots from some other device if the first/second/third boot devices fail. Boot Up NumLock Status This option allows you to select the power-on state of NumLock. Select On to activate the keyboard NumLock when the system is started. Select Off to disable the NumLock key.
Configuring the BIOS Integrated Peripherals Menu Select Integrated Peripherals from the CMOS Setup Utility menu and press Enter to display the Integrated Peripherals menu. Phoenix ± AwardBIOS CMOS Setup Utility Integrated Peripherals ` Onboard PATA/SATA Device ` Onboard Device ` USB Device Setting :Move Figure 7.
Onboard SATA Device Press Enter to display the Onboard PATA/SATA Device menu. ` SATA Mode LEGACY Mode Support [IDE] [Disabled] SATA Mode This is allows you set the onboard Serial SATA mode. IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage devices.
Configuring the BIOS Realtek GigaLan Use this function to set the onboard Realtek GigaLan function for LAN1. The options are Auto, Enabled and Disabled. PE4 Slot (PCIE x1) Use this function to set the PCI-e x1 Slot function. The options are Auto, Enabled and Disabled. Realtek Lan PXE Boot ROM This function allows you to enable or disable the onboard Realtek Lan PXE Boot ROM for booting from LAN.
USB Operation Mode Select the USB Operation Mode for USB device. Options are Full/Low Speed and High Speed. USB Keyboard Function Use this function to enable or disable support for USB keyboard under DOS.
Power Management Setup Menu Select Power Management Setup from the CMOS Setup Utility menu and press Enter to display the Power Management Setup menu.
ACPI Suspend Type This function on the Power Management Setup menu allows you to select an ACPI Suspend Type. Types to select from are [S1&S3], [S1(POS)], and [S3(STR)]. Run VGABIOS if S3 Resume This function on the Power Management Setup menu allows you determines whether or not to enable the system to run the VGA BIOS when resuming from S3(STR) or S1&S3. The Options are Auto, Yes and No.
Configuring the BIOS on by alarm. When set to [Enable], you can manually put in the day of the month and the time of the alarm. Day of Month Alarm Time (hh:mm:ss) Alarm [ 0] [0 : 0 : 0] To enter a day or time, use the Page Up and Page Down keys to scroll through numbers or enter the number using the keyboard number or the + and ± keys. POWER ON Function This function on the Power Management Setup menu allows you to define the power-on function.
PnP/PCI Configuration Menu Select PnP/PCI Configuration from the CMOS Setup Utility menu and press Enter to display the PnP/PCI Configuration menu.
Configuring the BIOS Reset Configuration This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has caused a serious conflict that prevents the OS from booting. The default setting is [Disabled].
IRQ-5 IRQ-9 IRQ-10 IRQ-11 IRQ-12 IRQ-14 IRQ-15 assigned assigned assigned assigned assigned assigned assigned to to to to to to to [PCI [PCI [PCI [PCI [PCI [PCI [PCI Device] Device] Device] Device] Device] Device] Device] Use Legacy ISA for devices compliant with the original PC AT Bus specification. Use PCI/ISA PnP for devices compliant with the plug-and-play standard, whether designed for PCI or ISA Bus architecture.
PC Health Status Menu Select PC Health Status from the CMOS Setup Utility menu and press Enter to display the PC Health Status menu. Phoenix ± AwardBIOS CMOS Setup Utility PC Health Status ` SmartFan Function VCC 3.3V CPU Vcore DIMM Voltage CPU VTT Voltage IOH Vcore VCC +12V 3VSB VBT CPU Temperature NB Temperature VREG Temperature System Temperature CPU Fan Speed Power Fan Speed Chassis Fan Speed :Move Figure 10. [Press Enter] 3.28V 1.19V 1.48V 1.23V 1.08V 4.96V 12.10V 3.23V 3.
SmartFan Function Press Enter to display the SmartFan Function menu.
Frequency/Voltage Control Menu Select Frequency/Voltage Control from the CMOS Setup Utility menu and press Enter to display the Frequency/Voltage Control menu. Phoenix ± AwardBIOS CMOS Setup Utility Frequency/Voltage Control Dummy O.C.
Memory Feature Select Memory Feature from the Frequency/Voltage Control menu and press Enter to display the Memory Feature menu. Phoenix ± AwardBIOS CMOS Setup Utility Memory Feature Memory SPD Memory Control Setting Memory Frequency Target Memory Frequency Channel Interleave Setting Rank Interleave Setting Memory Low Gap Parameters tCL Setting tRCD Setting tRP Setting tRAS Setting tRFC Setting Command Rate tRRD Setting tFAW Setting tRTP Setting tWR Setting :Move Figure 12.
Configuring the BIOS Rank Interleave Setting This function is allows you to select the Rank Interleave Setting. The options are 1 way, 2 way and 4 way. tCL Setting This function is set the CAS latency. The options are 0 through 18. tRCD Setting This function is set the RAS to CAS Delay for Read/Write commands to the same bank. The options are 0 through 15. tRP Setting This function is set the Row Precharge time. This is the Precharge-to-Active or Auto-to-Refresh of the same bank.
Voltage Control Select Voltage Control from the Frequency/Voltage Control menu and press Enter to display the Voltage Control menu. Phoenix ± AwardBIOS CMOS Setup Utility Voltage Control EVGA VDroop control CPU VCore CPU VTT Voltage CPU PLL Vcore QPI PLL Vcore DIMM Voltage DIMM DQ Vref IOH Vcore IOH/ICH I/O Voltage ICH Vcore [With VDroop] [Auto] 1.2750V [Auto] +0mv [Auto] 1.800V [Auto] 1.100V [Auto] 1.500V [+0mv] +0mv [Auto] 1.100V [Auto] 1.500V [Auto] 1.
Configuring the BIOS CPU PLL VCore Use the Page Up and Page Down to scroll through the voltages or select [Auto] to automatically set the voltage level for the CPU PLL Voltage. QPI PLL VCore Use the Page Up and Page Down to scroll through the voltages or select [Auto] to automatically set the voltage level for the QPI PLL Voltage. DIMM Voltage This function defines the voltage level for the DRAM.
Phoenix ± AwardBIOS CMOS Setup Utility CPU Feature Intel SpeedStep Turbo Mode Function CxE Function Execute Disable Bit Virtualization Technology Item Help [Enabled] [Enabled] [Auto] [Enabled] [Enabled] Main Level `` ***** Logical Processor Setting ***** Intel HT Technology [Enabled] Active Processor Cores [All] ***** QPI Controller Setting ***** QPI Controller Setting [Enabled] QPI Link Fast Mode [Enabled] QPI Frequency Selection [Auto] :Move Figure 14.
Configuring the BIOS Virtualization Technology When this function is enabled, it allows a VMM to utilize the additional hardware capabilities provided by Intel Virtualization Technology. Logical Processor Setting Intel HT Technology This function is allows you to enable the Intel HT Technology. The options are Enabled and Disabled. Active Processor Cores This function active number of cores to enable in each processor package. The options are All, 1 and 2.
Installing Drivers and Software Note: It is important to remember that before installing the driver CD that is shipped in the kit, you need to load your operating system. The motherboard supports Windows XP 32bit and 64bit and is Vista-capable. The kit comes with a CD that contains utilities, drivers, and additional software.
Configuring the BIOS Appendix A. POST Codes for the EVGA X58 SLI Micro Motherboard This section provides the Award POST Codes (Table 6) for the EVGA X58 SLI Micro Motherboard during system boot up. Debug LED with CPU Temperature Monitor The POST Codes are displayed on the Debug LED readout located directly onboard the motherboard. This Debug LED will also display current CPU temperatures after the system has fully booted into the Operating System. Table 6.
Award POST Codes Code Name 0A Mouse Init 0B Reserved 0C Reserved 0D Reserved 0E CheckSum Check 0F Reserved 10 Autodetect EEPROM 11 Reserved 12 Test CMOS 13 Reserved 14 Load Chipset 15 Reserved 16 Init Clock Description Initialized the mouse Check the integrity of the ROM,BIOS and message Check Flash type and copy flash write/erase routines Test and Reset CMOS Load Chipset Defaults Initialize onboard clock generator 17 Reserved 18 Init CPU 19 Reserved 1A Reserved 1B
Configuring the BIOS Award POST Codes Code Name Description 24 Init PNP Init PNP 25 Shadow VBIOS Shadow system/video BIOS 26 Clock Gen Init onboard clock generator and sensor 27 Setup BDA Setup BIOS DATA AREA (BDA) 28 Reserved 29 CPU Speed detect 2A Reserved 2B Init video 2C Reserved 2D Video memory test 2E Reserved 2F Reserved 30 Reserved 31 Reserved 32 Reserved 33 Early keyboard reset 34 Reserved 35 Test DMA Controller 0 36 Reserved 37 Test DMA Controller 1
Award POST Codes Code Name 3C Test Timer 3D Reserved 3E Test 8259-1 Mask 3F Reserved 40 Test 8259-2 Mask 41 Reserved 42 Reserved 43 Test Stuck Interrupt 44 Reserved 45 Reinit serial port 46 Reserved 47 EISA Test 48 Reserved 49 Size Memory 4A Reserved 4B Reserved 4C Reserved 4D Reserved 4E Init APIC 4F Reserved 50 USB init 51 Reserved 52 Memory Test 53 Reserved Description Test 8254 Timer 0 Counter 2.
Configuring the BIOS Award POST Codes Code Name 54 Reserved 55 CPU display 56 Reserved 57 PnP Init Display 58 Reserved 59 Setup Virus 5A Reserved 5B Awdflash Load 5C Reserved 5D Onboard I/O 5E Reserved 5F Reserved 60 Setup enable 61 Reserved 62 Reserved 63 Initialize Mouse 64 Reserved 65 PS2 Mouse special 66 Reserved 67 ACPI init 68 Reserved 69 Init Cache 6A Reserved 6B Setup 6C Reserved 6D Initialize Description Detect CPU speed and display CPU vendor
Award POST Codes Code Name Description Floppy 6E Reserved 6F FDD install 70 Reserved 71 Reserved 72 Reserved 73 Initialize Hard Drive 74 Reserved 75 Detect HDD 76 Reserved 77 Detect serial ports 78 Reserved 79 Reserved 7A Detect parallel ports 7B Reserved 7C HDD Write Protect 7D Reserved 7E Reserved 7F POST error check 80 Reserved 81 Reserved 82 Security Check Ask password security. 83 Write CMOS Write all CMOS values back to RAM and clear screen.
Configuring the BIOS Award POST Codes Code Name Description 88 Reserved 89 Setup ACPI tables 8A Reserved 8B Option ROM Detect 8C Reserved 8D Enable Parity Check 8E Reserved 8F IRQ12 Enable 90 Reserved 91 Reserved 92 Reserved 93 Boot Medium Read Detect and store boot partition head and cylinders values in RAM 94 Final Init Final init for last micro details before boot 95 NumLock Set NumLock status according to Setup 96 Boot Attempt Set low stack Boot via INT 19h.
Award POST Codes Code Name Description B1 Unclaimed NMI If unmasked NMI occurs, display Press F1 to disable NMI, F2 reboot. BF Program MCP To program chipset from defaults values E1-EF Setup Pages E1- Page 1, E2 - Page 2, etc.
Configuring the BIOS DRAM - Dynamic random access memory DVD - Digital Versatile Disc DVI ± Digital Video Interface FDC - Floppy Disk Controller FSB ± Front Side Bus FTW ± For The Win! GHz ± Gigahertz GPU ± Graphics Processing Unit HDD - Hard Disk Drive HDMI - High-Definition Multimedia Interface HDR ± High Dynamic Range Lighting HPET - High Precision Event Timer HT ± Hyper-Threading HSF - Heat Sink Fan I/O - Input/Output IDE - Integrated Drive Electronics IEEE - Institute of Electrical and Electronics Eng
NIC - Network Interface Card NTFS - New Technology File System OEM - Original Equipment Manufacturer PATA - Parallel Advanced Technology Attachment PCB - Printed Circuit Board PCI - Peripheral Component Interconnect PCIe - Peripheral Component Interconnect Express PCI-x - Peripheral Component Interconnect Extended POST ± Power on Self Test PWM ± Pulse Width Modulation QDR - Quad Data Rate QPI ± Quick Path Interconnect RAID - Redundant Array of Inexpensive Disks RGB - Red Green Blue SATA - Serial Advanced Te
