User guide

EVGA P67 FTW Motherboard

Preparing the Motherboard

Installing the CPU

Be very careful when handling the CPU. Hold

the processor only by the edges and do not

touch the bottom of the processor.

Use the following procedure to install the CPU

onto the motherboard:

Unhook the socket lever by pushing down and

away from the socket.

Pull the socket lever back and the load plate will

automatically lift. There is a protective

socket cover within the CPU socket to

protect the socket when there is no CPU

installed.

Remove the protective socket cover from the

CPU Socket.

Note: After removing the CPU socket cover, it is recommended that you keep it

in case you need to remove the CPU so for any reason you can replace

the cover to avoid damaging the CPU socket pins.