User manual

PC-over-IP Administrative
Interface User Manual
50
Figure 1-37: Attached Devices Webpage
1.9.2.1 Monitors
The Monitors section reports the Name, Serial Number, Vendor Identification (VID),
Product Identification (PID), Date, and Status of the monitor attached to each port. The
first line provides information for monitor 1 and the second line provides information for
monitor 2.
This option is available on a Portal and is available on the Host when in a PCoIP session.
1.9.2.2 USB Devices
The USB Devices section reports the Name, Serial Number, Vendor Identification (VID),
Product Identification (PID), Device Class, Sub Class, Protocol, and Status of the USB
device attached to each port. The first line provides information for the first USB port, the
second line provides information for the second port, etc.
Table 1-14 summarizes the possible Status descriptors for USB Devices.
Table 1-14: USB Device Status
Status Description
Not Connected No device connected
Standalone Device detected outside of a PCoIP session
Not Initialized Device detected in a PCoIP session, but host controller has not
initialized the device
Failed Authorized Device detected in a PCoIP session, but not authorized (see
Section 1.7.1)
Locally Connected Device detected and authorized, but locally terminated in a
PCoIP session (e.g. local cursor)
Connected Device detected and authorized in a PCoIP session
This option is only available on a Portal; on the Host it is disabled and non-editable.
1.10 Upload Menu
The Upload menu contains links to pages that can be used to upload files to the device.
The webpages in the Upload menu are: