® A USB VGA Display Port Quick Install Guide Supports UV 12 and UV 16
Introduction EVGA’s UV Plus+ gives you the ability to use multiple displays by utilizing a USB 2.0 port on your laptop or PC. Each monitor will need either a UV 12 or UV 16 and up to 6 UV Plus+ devices can be used at the same time allowing multiple displays through CRT and LCD monitors, or a Projector. With the ability to Mirror or Extend your desktop up, down, left, or right, EVGA’s UV Plus+ gives you full freedom to move about your virtual work space. System Requirements: • USB 1.1 is supported (USB 2.
DVI connection Hardware and Driver Setup: 1 – Power on your Laptop or your monitor and PC to begin the installation. 2 – Once in Windows, install the UV Plus+ drivers from the provided installation CD. After the installation process has finished reboot your computer. 3 – Attach your monitor’s DVI connector to UV Plus+ (a DVI to VGA adapter is provided if needed) 4 – Plug in the provided USB cable to UV Plus+ and the other end to your Notebook or PC’s USB port.
FAQ Question: Will the UV Plus+ attached monitor render full 3D hardware rendered graphics when in Mirror or Extended Modes? Answer: Yes, full 3D hardware rendered graphics can be displayed while in Mirror or Extended Modes, however running in such a configuration is limited as the application in use may become slower or not as responsive. Question: Discoloration and constant flickering occurs through the UV Plus+ attached monitor.
