User Manual

Asset
AssetAsset
Asset Transponder
TransponderTransponder
Transponder with Non
with Nonwith Non
with Non-
--
-replaceable Battery
replaceable Batteryreplaceable Battery
replaceable Battery
EV3
EV3EV3
EV3-
--
-A
AA
AT
TT
TNRB
NRBNRB
NRB
This asset transponder, with non-replaceable
battery, enjoys the benefit of its sister-product,
EV3-AT. With its dramatically lower power
consumption, this EV3-ATNRB boasts a non-
replaceable battery lifetime much better,
resulting in a greatly improved ROI.
This device operates in a master/slave
configuration with an interrogator. In all cases,
the interrogator acts as the master unit initiating
commands from the transponder. Once, the
device has been successfully woken up, it will
respond to data transmission from the
interrogator by sending packets of data.
OPERATION OF THE TRANSPONDER
This Device has a non-replaceable battery and is
ready for operation.
MOUNTING OF THE TRANSPONDER
This device can be mounted to a desired location
using appropriate methods, such as magnet,
Velcro strips, screws or other means;
SPECIFICATIONS
RFID Protocol ISO 18000-7:2008
Frequency 433.92MHz
Power Internal battery, primary
lithium
Battery Life 4 years at 2 collections per
day
Range 300 feet unobstructed
Dimensions 6.18˝L x 0.984˝W x 0.67˝H
Weight 2.1 oz (59.5 g)
Operating
Temperature
-30⁰C to +70⁰C
Dust / Moist IP 64
Beeper Audible beeper for tag
location and status
indication
Memory 2 Kbytes
Compliance FCC, HERO
This device complies with part 15 of the FCC Rules and with
RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device must not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
WARNING: Changes or modifications not expressively
approved by the party responsible for compliance could void
the user's authority to operate the equipment.