User Guide
Table Of Contents
- CHAPTER ONE
- L157 Open Box
- CHAPTER TWO
- L157 Basic Operation Guide
- 1)Charging Voice Recorder
- 2)Turn On Voice Recorder
- 3)How to Recording
- 6)How to Pause and Resume Your Recording
- 7)How to Playback Recordings
- 8)How to Fast Forward / Rewind
- 9)How to Delete Recordings
- 10)How to Playback Music
- 11)Restore to Factory Settings
- 12)Format Device
- 13)How to Connect to Computer
- 14)Format EVISTR L157 Drive on Computer Directly
- 15)System Time & Date Setting
- 16)Go to Setting (Menu Options)
- CHAPTER THREE
- L157 Advanced Operation Guide
- CHAPTER FOUR
- CHAPTER FIVE
- TROUBLE SHOOTING
- 1)No Voice Recordings
- 2)How to Close Record Light
- 3)Format Error
- 4)Disk Error
- 5)How to connect to computer
- 6)Can I delete recordings from computer
- 7)When Connect to computer, the buttons not work
- 8)Cannot find my recordings in the recorder
- 9)How to Turn ON Voice Activated Function
- 10)How to Use the AVR Mode (Voice Activated Function)
- 11)Press REC, it not recording
- 12)Press REC, it shows “OVER RECORD”
- 13)Why it is only playing 10 seconds
- 14)Why it playback in random
- 15)How to use the A-B repeat function
- 16)The recording is noise
- 17)The recorder auto shut down when I am recording
- 18)I Cannot Shut Off My Voice Recorder
- 19)How to format the recorder
- 20)Space is full
EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
Page - 18 - of -25 -
Once set the correctly time, remember press M(menu) to confirm the changes.
2.5 Language
Change the device display language
2.6 Information
Player Information: it will show the device firmware version, and system firmware released
date
Disk Space: it will show the free space, and total space of the built-in memory
2.7 Format Device
Format device, it will erase all data on the device, and cannot be restored forever
Notice:
Do not format the device unless you have already backup the data on the device to computer,
and you are sure about this.
Do not cut off its power during format the device, otherwise it will meet disk error
During format device, wait till showing completed information, and the device reboot, and then
you could switch off the device.
If unfortunately, cut off device power, and see DISK ERROR, Here is the rescue:
Please kindly cut off the device POWER from ON to OFF position, and connect to
WINDOWS computer, format the disk again from computer, and then things will be normal. And
all data will be erased thoroughly. (for MAC computer need to contact customer for tutorials)
2.8 Factory settings
Factory settings: Restores to factory default. Very helpful if confusion arises when creating
settings.
Enter to Factory Settings, screen will show
“ Restore
Yes
No”
When select Yes, and press M(menu) to confirm the choice, so all settings will be restored to
default. Screen will show “Restored!”
3) Play Setting
3.1 Play Mode
Repeat:
Repeat off, Repeat One, Repeat All
Repeat off: select and confirm this, it will play in normal, from first recording to the last one
Repeat One: select and confirm this, it will repeat on single track again and again
Repeat All: select and confirm this, it will repeat from A-Z again and again