User Guide
Table Of Contents
- CHAPTER ONE
- L157 Open Box
- CHAPTER TWO
- L157 Basic Operation Guide
- 1)Charging Voice Recorder
- 2)Turn On Voice Recorder
- 3)How to Recording
- 6)How to Pause and Resume Your Recording
- 7)How to Playback Recordings
- 8)How to Fast Forward / Rewind
- 9)How to Delete Recordings
- 10)How to Playback Music
- 11)Restore to Factory Settings
- 12)Format Device
- 13)How to Connect to Computer
- 14)Format EVISTR L157 Drive on Computer Directly
- 15)System Time & Date Setting
- 16)Go to Setting (Menu Options)
- CHAPTER THREE
- L157 Advanced Operation Guide
- CHAPTER FOUR
- CHAPTER FIVE
- TROUBLE SHOOTING
- 1)No Voice Recordings
- 2)How to Close Record Light
- 3)Format Error
- 4)Disk Error
- 5)How to connect to computer
- 6)Can I delete recordings from computer
- 7)When Connect to computer, the buttons not work
- 8)Cannot find my recordings in the recorder
- 9)How to Turn ON Voice Activated Function
- 10)How to Use the AVR Mode (Voice Activated Function)
- 11)Press REC, it not recording
- 12)Press REC, it shows “OVER RECORD”
- 13)Why it is only playing 10 seconds
- 14)Why it playback in random
- 15)How to use the A-B repeat function
- 16)The recording is noise
- 17)The recorder auto shut down when I am recording
- 18)I Cannot Shut Off My Voice Recorder
- 19)How to format the recorder
- 20)Space is full
EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
Page - 6 - of -25 -
Play a Recording: Choose the recording you wish to hear by pressing Menu -> use Up/Down
button to choose, press PLAY.
Play Next / Previous Recording: press the Up/Down button.
Fast Forward / Rewind: press and hold the Up(REW)/Down(FF) button.
4) Quick Menu Option Guide Using UP/Down Button
To select and confirm, press Menu (M) button.
Change Record Format/Quality: go to Menu (M) -> Up/Down button to select Record Setting ->
Recording quality -> (1536kpbs WAV format, 128kpbs / 64kpbs MP3 format)
Voice Activated Mode (AVR mode): go to Menu (M) -> select Record Setting -> Up/Down
button to Voice-activated mode-> M button to select AVR mode -> select ON.
Voice Activated Level: go to Menu (M) -> Up/Down button to select Record Setting -> select
Voice activated sensitivity -> select from levels 1 to 5.
Set Time: go to Menu (M) -> Up/Down button to select System setting -> Up/Down button to
select Date and time -> select Set time -> use Up/Down and VOL+ buttons to change time.
Press M button to confirm.
Set Date: go to Menu (M) -> Up/Down button to select System setting -> Up/Down button to
select Date and time -> select Date -> with Up/Down and VOL+ buttons change date, and press
M button to confirm.
5) Important Notice for Using The Device
Do not shut down the device’s power button when it is saving a recording.
Do not scratch the recorder body.
If typing or writing near the device while record function is on, it will capture the noise.
Do not format the device unless the files have been backed up.
Do not cut off power while formatting device.
Do not delete a file unless the file has been backed up.