User Guide
Table Of Contents
- CHAPTER ONE
- Basic Operation Guide- L53
- CHAPTER TWO
- ADVANCED OPERATION GUIDE
- 1)How to Select Record Quality
- 2)Voice Activated Recording (AVR Mode)
- 3)Microphone Sensitivity Control
- 4)What is TRACK ON Recording
- 5)What is Subsection Recording
- 6)What is AUTO Record
- 7)What is Record Monitor
- 8)Telephone Recording
- 9)T-mark
- 10)Set Date and time
- 11)Information
- 12)Format Device
- 13)Factory Settings
- 14)A-B Repeat
- 15)Lock Button, No Button Works
- 16)Connect External Microphone
- 17)Line-in Recording
- 18)Why LINE-IN Recording with Noise
- CHAPTER THREE
- CHAPTER FOUR
- TROUBLE SHOOTING
- 1)No Voice Recordings
- 2)Format Error
- 3)How to connect to computer
- 4)Can I delete recordings from computer
- 5)When Connect to computer, the buttons not work
- 6)Cannot find my recordings in the recorder
- 7)How to turn on voice activated function
- 8)How to Use Voice Activated Function
- 9)Press REC, it not recording
- 10)Memory is full
- 11)How to use the A-B repeat function
- 12)LOCK, No Button Works
- 13)The recording is noise
- 14)It suddenly shows delete file
- 15)No songs
- 16)Cannot Shut Off Recorder
- 17)How to format the recorder
- 18)Space is full
EVISTR VOICE RECORDER
http://evistr.com support@evistr.com
Page - 17 - of -18 -
sensitivity, only a very low decibels or quiet speaking could be picked up.
Also, at the same time, during recording, you could press the VOL+/VOL- to adjust the microphone
sensitivity, this will also affect voice activated sensitivity.
9) Press REC, it not recording
First check, the recording light blink or not
Second, can you see VOX on the screen
If so, it will only records when loud enough decibels sound detected, we can go to record setting,
find AVR sensitivity, and adjust it. It helps. But we suggest you could turn off the AVR mode.
10) Memory is full
When press REC, it doesn’t record, it shows “memory is full”, that means the voice recorder memory
is full.
Although you may not record too long. Maybe there is some files that cannot be read by the
recorder, so you cannot find directly from the recorder
So connecting to computer and backup important files, after that format the recorder from your
computer directly
11) How to use the A-B repeat function
During playback, press A-B, you will see A on the screen, and B is blink, it selected the start point
Press A-B again, select point B
Now it will playback between Point A to B
NOTE: exit A-B repeat, just press A-B button again, it will exit
12) LOCK, No Button Works
Press & hold the A-B button to unlock
13) The recording is noise
Don’t record near computer, electric fans, air conditioner, sound bar that will easily cause noise, the
recorder will pickup this statics noise
14) It suddenly shows delete file
When tapped ERASE button at the left side, it will enter delete mode.