User Manual

3) Format Error
4) Disk Error
5) Failed to Connect to Computer
6) Can Recordings Be Deleted from the
Computer?
7) Cannot Find My Recordings in the
Recorder
8) It Show LOCK, No button works
During recording, pushing down the POWER
BUTTON to OFF position will cause file
damage. Before switching off recorder, first
press STOP to save the recordings.
Due to static shock, like over charging, record-
er cuts off its power when the formatting
process doesn't complete, and device loses
system firmware.
Yes. When the recorder is successfully connect-
ed to a computer, find it as the removable drive
name “L53.” All recordings are saved in a folder
named “RECORD” in the drive.
the recorder. Otherwise, it will exit connection
mode, and fail to connect to the computer. At
this status, it will only charge the voice recorder.
For more failed connect to computer issues,
please contact us. We will reply promptly.
You may delete the file or copy the file onto an
ordinary USB Flash Drive.
Check if it was read the MUSIC folder, push the
DVR/MUSIC button to DVR position.
Press and hold A-B button to unlock
Before connecting the recorder to a computer,
turn off the recorder.
When connecting to a computer, do not press
any buttons on the recorder or do any operations
How to Rescue: Keep power button at OFF
position, connect device to Windows computer,
and format the recorder disk again. Device will
be normal.
This usually happens because of three reasons.
The recordings time is less than 5 seconds.
13 14