User Guide
Table Of Contents
- CHAPTER ONE
- V508 Open the Box
- V508 Quick Operation Guide
- V508 Device Important Notices
- CHAPTER TWO
- V508 Basic Operation Guide
- 1)Charging Voice Recorder
- 2)Turn On Voice Recorder
- 3)How to Recording
- 3)How to Pause and Resume Recording
- 4)How to Playback Recording
- 5)How to Fast Forward / Rewind
- 6)How to Move to Next / Previous
- 7)How to Adjust Speaker Volume
- 8)How to Delete Recordings
- 9)Download File to Computer
- 10)How to Play Music
- 11)Restore to Factory Settings
- 12)REST (When Device was frozen)
- 13)How to Connect to Computer
- 14)Format EVISTR V508 Drive on WIN Computer Directly
- 15)System Time & Date Setting
- 16)Go to Setting (Menu Options)
- CHAPTER THREE
- V508 Advanced Operation Guide
- CHAPTER FOUR
- CHAPTER FIVE
- TROUBLE SHOOTING
- 1)No Voice Recordings
- 2)How to Close Record Light
- 3)Disk Error
- 4)How to connect to computer
- 5)Failed Connect to Computer
- 6)Can I delete recordings from computer
- 7)When Connect to computer, the buttons not work
- 8)Cannot find my recordings in the recorder
- 9)How to Open voice activated function
- 10)How to Use the AVR Mode (Voice Activated Function)
- 11)Press REC, it not recording
- 12)Press REC, Not Recording
- 13)Why it playback in random
- 14)How to use the A-B repeat function
- 15)The recording is noise
- 16)It suddenly shows delete file
- 17)The recorder auto shut down when I am recording
- 19)How to format the recorder
- 20)Memory is full
EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
Page - 14 - of -28 -
Turn on the recorder
Press and hold M (button 2 seconds), switch to music folder ( if we were at recordings folder)
Press PLAY to playback music
Notice:
if it shows “no songs founds” that means there is no songs file in the recorder disk, or the song
file format are not supported.
Press and hold M button for 2-3 seconds, and then release the MENU button, wait a moment, it
will switch back to recordings folder
11) Restore to Factory Settings
When we mistakenly change settings in wrong way, and don’t know how to correct it. Restore to
factory settings, could be very helpful. All settings will be restored to default, same like the first day
we just saw the device.
Here are the steps to restore to factory settings
Turn on the voice recorder by press PLAY (when power is ON)
Press
to Main Menu
, find & select “System Settings”
Press PLAY, enter System Settings, find & select "Factory Settings"
Press PLAY, enter it, find & select “Yes”
Press PLAY, confirm your selection, and it starts to restore to factory settings.
When it succeed, screen will show “restored!”
12) REST (When Device was frozen)
There is a REST hold at the right side, use small needle push it to reset the device.
13) How to Connect to Computer
Use the enclosed Micro USB cable connect it between our computer and voice recorder, when
Restored!
Restore factory
Yes
No
Setting
Information
Factory settings
Format device
Setting
Language
Date and time
Display settings
System Settings