User Guide

EVISTR VOICE RECORDER
http://blog.evistr.com [e-mail]
Page - 20 - of -28 -
2) System Setting
2.1 Language
Change the device display language
2.2 Date and time
Set the system time of the recorder (set time, and set date)
VOL+/VOL-: to adjust the hour, minute, year, month, day
: move to next
Notice:
Once set the correctly time, remember press PLAY to confirm the changes.
Only set correctly time, and keep the POWER button at ON position, so the AUTO RECORD
function could work properly as desired
2.3 Display Settings
2.3.1 Backlight timer
It will control how long the screen will light up without any operation.
The options: 10seconds, 20seconds, 30seconds, Always on
Notice: we do not recommend to select at always on, because this will consume the battery
very fast.
2.3.2 Brightness
Brightness: adjust the screen from dark to bright
The options: from 01 to 15
Notice: higher number means the screen will be brighter, and need to press PLAY to confirm the
changes, otherwise the setting will not be effected.
2.4 Sleeper Timer
When select sleeper time, it will force the device to be automatically switch off.
The options: OFF, and set sleep timer time can select from 10minutes, 30minutes, 60minutes,
90minutes
2.5 Password Set
Password switch: OFF default. When turn it on, we need to set password for the device
Password set: input a 6 digits password. Press +/- to set the numbers. Press REW/FF to move to
next.
Note
1. If forgot password, please enter 18 18 18, and then hold button more than 3 seconds
to reset the device
2. If password function is ON, when connect to computer, we need to input correct password,
otherwise, it will fail connect to computer
2.6 Information