USER’S MANUAL EVO2 MOTORIZED TREADMILL MODEL NUMBER: EVO2 USER WEIGHT LIMITATION: 400lbs. TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.
EVO2 MOTORIZED TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.
EVO2 MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
EVO2 MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.
EVO2 MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY.
EVO2 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No.
EVO2 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No.
EVO2 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1. First, remove the 6 x 13mm Washers (34) and M6 x 55mm Bolts (33) from the Base Frame (43), they have been pre-assemble by the factory. Then make sure to connect the wires from the Left Upright (26) to the Base Frame (43).
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 2: Rotate the Computer (1) up to the correct position as shown in FIG-2 and secure in place using two M6 X 20mm Screws (5). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 3: NOTE: Please follow these instructions before attaching the Console Tray (29). Run the Cd Player Wires from the back of the Computer (1) first through the small hole on the Console Tray (29), then through the tabs on the back of the Console Tray (29) and finally through the small hole on the side of the Computer (1) as shown in FIG-3.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 4: Connect the wires from the Left Handlebar (16) and Left Upright (26). Attach the Left Handlebar (16) to the Left Upright (26) using two M8 x 50mm Allen Bolts (104) and one Connection Plate (23). Repeat this procedure to attach the Right Handlebar (17) to the Right Upright (27). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 5: Connect the wires from the Front Handlebar (13) and Left Upright (26). Attach the Front Handlebar (13) to the Left and Right Uprights (26 and 27) using four M6 x 12mm Screws (31). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 6: Attach the Left #1 Handlebar Rear End Cap (7) and Left #2 Handlebar Rear End Cap (8) to the Left Upright (26) using two Plastic Fixing Inserts (12) and four #8 x 12mm Screws (11). Attach the Right #2 Handlebar Rear End Cap (9) and Right #1 Handlebar Rear End Cap (10) to the Right Upright (27) using two Plastic Fixing Inserts (12) and four #8 x 12mm Screws (11). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 7: Attach one Plastic Cover (32) to the Left Upright (26) using one M6 x 12mm Screw (31). Repeat this procedure for the Right Upright (27). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 8: Attach the Upright Plastic Shroud Left #3 (105), Upright Plastic Shroud Left #1 (46) and Upright Plastic Shroud Left #2 (47) to the Left Upright (26) and secure with four #8 x 19mm Screws (107) and six #8 x 15mm Screws (108). Repeat this procedure for the Right Upright (27). Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 9: Connecting the Speakers and CD Player: When connecting the Speakers to the Console first plug the Speaker Wires into the sides of the Console. Then insert the Speakers into the sides of the Console and secure with Knobs. Plug the two wires from the Console Tray into the CD Player then place it on the Tray as shown in FIG-4. NOTE: There are three plugs located on the left side of the CD player. The rear plug is the AC power.
EVO2 MOTORIZED TREADMILL TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONS: To roll away for storage simply grab the rear deck, lift slightly and roll to desired location. Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL COMPUTER OPERATION Heart Rate A B Time/Distance Preset Programs C D Calories/Calories Per Hour Incline/Age E F Preset Programs Message Center G H Safety Key POWER ON Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All the LED lights will auto scan. SLEEP MODE The computer will automatically enter SLEEP MODE if left idle for 5 minutes without any input in POWER ON status.
EVO2 MOTORIZED TREADMILL COMPUTER OPERATION QUICK START In POWER ON status, press the START button to QUICK START. The Speed starts from 0.5MPH/0.8KMPH and the Incline Level starts from 0. Press the SPEED UP/DOWN buttons to change the Speed. Press the INCLINE UP/DOWN buttons to change the incline level. During the exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels while the other information (Time, Distance, Calories) is paused.
EVO2 MOTORIZED TREADMILL COMPUTER OPERATION GOAL COURSE CALORIES When the computer is in POWER ON status press the GOAL COURSE CALORIES button on the console. The LED GOAL COURSE CALORIES button lights up. If no buttons are pressed within 3 minutes the program will return to POWER ON status. If you wish to return to POWER ON status, press the STOP button any time. The CALORIES LED will light up and show the preset calories burned as 050 and blinking. After press the GOAL COURSE CALORIES button.
EVO2 MOTORIZED TREADMILL COMPUTER OPERATION 60 MINUTE WALK When the computer is in POWER ON status press the 60 MINUTE WALK button on the console then press the START button to start the program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the LED 60 MINUTE WALK button will light up. The TIME counts down from 60:00, and the other information will count up until the treadmill stops. The SPEED and INCLINE level follow the preset program.
EVO2 MOTORIZED TREADMILL COMPUTER OPERATION WORKOUT TIME SET UP After the AGE SET UP procedure, the WORKOUT TIME SET UP procedure starts. The TIME LED will show the preset time of 60:00. Press INCLINE UP/DOWN to set up the time. Press ENTER to confirm. If you do not press the INCLINE UP/DOWN button or do not press ENTER to confirm the time within 30 seconds, the TIME LED will start blinking for 5 seconds in 30 second intervals to alert you.
EVO2 MOTORIZED TREADMILL MOTION CONTROL OPERATION MOTION CONTROL: 1. Press the button on the console to switch the motion control function on and off: • • When the LED light is ON the MOTION CONTROL is active. When the LED light is OFF the MOTION CONTROL is off. 2. After switching on the MOTION CONTROL wave your right hand approximately 6 inches above the motion sensor on the right handle bar to increase the speed. The sensor will sound one short BEEP per scan and speed up by 0.1 MPH per BEEP.
EVO2 MOTORIZED TREADMILL MAINTENANCE HOW TO MAINTAIN THE EVO2 TREADMILL: Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage. • Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.
EVO2 MOTORIZED TREADMILL MAINTENANCE CLEANING: Routine cleaning of your treadmill will extend the product's life. • Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance. • Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.
EVO2 MOTORIZED TREADMILL WARRANTY This warranty covers all parts including frame, electronics and wear parts for a lifetime. Labor costs under this warranty are covered for a period of one year from the date of purchase. Labor will be provided by an approved Smooth Fitness reseller, or at the discretion of Smooth fitness, through an approved independent service agent. Conditions Of Warranty This warranty is valid only for the original purchaser and is not transferable.
EVO2 MOTORIZED TREADMILL IMPORTANT STEPS Warning: Before using this product, please consult your personal physician for a complete physical examination. Frequent and strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before exercising.
EVO2 MOTORIZED TREADMILL TARGET HEART RATE Finding your pulse: To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest way is to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck muscles. Count the number of beats in ten seconds, and then multiply that number by six. This gives you the number of beats per minute.
EVO2 MOTORIZED TREADMILL MUSCLE CHART Targeted muscle groups: The exercise routine that is performed on this product will develop primarily lower body muscle groups. These muscle groups are shown in gray color on the chart below. Shoulder muscles A B Pectoral muscles Bicep muscle C D Abdominal muscles Forearm muscles E F Quadricep muscles Calf muscles G H Trapezius muscles Tricep muscles I J Back muscles Gluteal muscles K L Hamstring muscles Visit us at: www.evofitness.
EVO2 MOTORIZED TREADMILL STRETCHING ROUTINE Warm up and cool down: A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two and preferably three times a week, resting for a day between workouts. After several months, you can increase your workouts to four or five times per week. Warming up is an important part of your workout, and should begin every session.
EVO2 MOTORIZED TREADMILL STRETCHING ROUTINE Hamstring Stretch: Sit with your right leg extended. Rest the sole of your left foot against your right inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax and then repeat with left leg extended. Inner Thigh Stretch: Sit with the soles of your feet together with your knees pointing outward. Pull your feet as close into your groin as possible. Gently push your knees towards the floor. Hold for 15 counts.
EVO2 MOTORIZED TREADMILL TROUBLESHOOTING Troubleshooting NOTE: Do not touch any internal electric wires without consulting the manufacturer. Treadmill will not start: 1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual). 2. Check the circuit breaker reset switch located on the front of the treadmill.
Smooth Fitness 112 Gaither Drive Mt. Laurel, NJ 08054 Toll Free Customer Service: 1.888.800.1167 Website: www.evofitness.
