installation and_manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
21
INSTALLING COOK SURFACE
STEP 10: Locate two (2) J-hooks attached to underside of cooktop, cut zip ties and remove
nyloc nut.
One at a time, slide J-hooks through guide tubes. Slowly place cooktop down. Open both
waste doors and tighten nyloc nut on end of J-hook located at inside rear of each waste door.
Open waste
doors to locate
end of J-hook.
Guide Tube
J-Hook
Tighten nyloc nut
at end of each
J-hook.