Manual

INSTALLATION INSTRUCTIONS
Affinity 30G
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
30
REPLACING ELECTRONIC IGNITOR BATTERY
If the ignitor does not work, you may need to replace the battery.
1. Look under the front control panel just below the ignitor button (A).
2. Remove the ignitor cap, rotating it counterclockwise (B).
3. Install a AA type battery into the ignitor housing with the positive “+” end facing downward (C).
4. If the ignitor is still not working, contact Evo Customer Support for an ignitor replacement.
Remove and replace
AA type battery with
+ positive end facing
downward.
B C
A
Remove ignitor
battery cap to
remove battery.
Look under front
control panel to
nd ignitor battery
compartment.