Specifications

40 41
5.3 Setting the desired target temperature
Tap or to change the target temperature value.
5.4 Time setting
Tap to enter the system time and timer on/off.
Tap to exit.
(1). Time setting
Tap can enter the setting interface of system time.
Heating mode
Highlighted icon shows
the current mode
Cooling mode
Automatic mode
Tap hour/minute to
select the value, then
tap or to
change.
Cancel or exit
Save
(2). Setting the Timer
Tap to enter the menu for timer on/off control. This operation is the same as time setting
shown above.
5.5 Malfunction Menu
If there are error codes on the unit, the top right of controller will show the malfunction
icon, tap to enter the troubleshooting menu.
5.6 Parameter Table
Current page/ total pages
Dragging your nger left
or right to turn the pages.
1-Current error
0-No error current
Exit
Green tick means
timer is set. White tick
means timer is off.
Code Meaning Default Remarks
r01 Cooling set point 27º Adjustable
r02 Heating set point 38º Adjustable
r03 Auto mode set point 27º Adjustable