User Manual

Install the Window Slider Kit

1. Cut the foam seal (adhesive type) to the proper length

and attach it to the window sash.

2. Attach the window slider kit to the window sash. Adjust the length of the Window

Slider Kit: Loosen the screw A to adjust the length of the Window Slider Kit, then

tighten the screw when the length is suitable.

Note: the length of the Window Slider Kit is 67.5cm to 120cm.

3. Carefully lower the window. Secure the vent panel in place with 4 type B screws,

plus one screw for each extension.

Screw A

VerticalHorizontal

Foam Seal A

window

slider

kit

window sash

Screw B