User Manual

4
The room space for the installation, use, repair, and storage of this air conditioner should
be greater than 12m².
If the AC unit is installed, used or stored in an unventilated room, ensure any build
up of possible refrigerant gas leaks is prevented, as there could be a danger of fire or
explosion should the refrigerant come into contact with electric heaters, stoves or
other ignition sources.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
The specification of the fuse is printed on the circuit board, such as: AC 250V/5A
Don’t touch the unit with wet or damp hands or when barefoot.
Don’t pull the unit by the cord.
Don’t remove any part of the unit unless instructed by an authorised technician.
Don’t move the unit, unless the power has been cut off and the power cord is tied to
the power cord buckle.
Don’t operate the unit with a damaged plug or a loose socket.
Ducts connected to an appliance shall not contain an ignition source.
The AC unit must be stored and transported in an upright position or damage to the
compressor unit may occur. If in any doubt, wait at least 24 hours between installing
and using the unit.
Important