User guide

Inserting cards manually

The printer may optionally be equipped with a manual feeder for inserting cards individually.

The manual feeder option needs to be congured via the printer driver’s Properties, under the “Graphics” tab.

Choose “Manual feed” from the “Card management - input” menu and select the desired output method from the menu.

The manual card feeder is installed as follows:

Remove the card feeder from the printer as shown.

Using the lever, set the card thickness to the MAX position.

Place the manual card feeder in the printer as shown. Then press on the upper section of the feeder until it clicks.

Insert the cards, as indicated.

Ê Ë