User`s guide

Protect the validity of your Guarantee!
Not observing the cleaning procedures contained in this chapter can invalidate your printer and for
print head guarantees. The Evolis company accepts no responsibility if the printer is used in an
unauthorised cleaning condition.
The following cleaning articles are available from Evolis :
❖ Pre-saturated cleaning cards with 99% isopropyl alcohol for cleaning the inside of the printer
❖ Cleaning swabs with 99% isopropyl alcohol base for cleaning the print head
❖ Pre-saturated cleaning cloths for cleaning the cleaning roller
1. Cleaning of the inside of the printer
The Tattoo printer is fitted with cleaning alert which is
activated every 500 cards that has been inserted.
The warning light switches on as follows :
If you do not clean the printer when the light has
switched ON, is starts flashing when another 100 cards
have been inserted as follows :
When the light starts flashing, the warranty of the print
head will be void, unless cleaning has been done before.
This simple cleaning system requires the use of specially pre-saturated cleaning cards specially
designed for the printer. A cleaning kit with samples of these cards is delivered with your package.
Repeatedly running the card through inside the printer cleans the card transport rollers, the dust
removing roller and the print head.
18
3.
Chapter 3
IMPORTANT !
The printer will continue to function even though the automatic
cleaning alarm is activated.
Cleaning
Status after 500 inserted cards
Status after 600 inserted cards