User guide

3-4 Servicing the print head
Recommended cleaning cycle: whenever the ribbon* is changed
Servicing accessory: Special cotton bud impregnated with isopropyl alcohol
The print head is cleaned in the course of the printer’s routine servicing procedure (see previously).
However, to maintain the original print quality and to absorb surplus ink on the print head, we recommend that you regularly clean the
print head (whenever the ribbon is changed) using the cotton buds supplied by Evolis.
You must also protect the print head and its components from any discharge of static electricity.
Unplug the printer from its power supply before cleaning the print head.
Follow the cleaning cycles scrupulously.
Avoid any contact between the print head and any metal or sharp objects.

the print head.
* for rewriteable printers, please refer to the table on page 17
3
22