Evolution Engines 45GX/58GX USER GUIDE © 2005 Manufactured exclusively for Horizon Hobby, Inc. 800-535-5551 www.horizonhobby.
Before using this engine, please read these instructions carefully. Mounting the Engine Selecting a Suitable Propeller Introduction Most model airplane designs make provision for an engine mount. It is extremely important that the engine mount be securely attached to the airplane’s firewall and that the engine is securely attached to the engine mount. Follow the instructions included with the airplane for mounting the engine. The engine should be fastened in place with 4 screws. Use 1/4” or 6mm screws.
Fuel for the Evolution Gas Engine Starting the Engine Continued The Evolution® Gas engine has been designed to run on a mixture of high-quality unleaded gasoline and synthetic oil intended for racing 2-stroke gasoline engines. For the run-in period of the new engine, mix the fuel in a ratio of 30 parts gasoline to 1 part lubricant. After run-in, use a ratio of 40 parts gasoline to 1 part lubricant. Starting the Engine The new Evolution Engine carburetor comes adjusted to a basic setting.
5GX Evolution Engine Dimensions Trouble-Shooting Guide If the engine does not start Mechanical Faults - check and use a new spark plug if needed. (Check the spark: put the plug into the cable end and by turning the engine you´ll see the necessary spark. Note: The plug must touch a metal part of the engine.) - check fuel lines. - check for proper mechanical function by turning the engine over. - check that the carburetor is correctly installed.
Installation of the Ignition Unit Continued Evolution Engines Ignition System The spark ignition included with your Evolution® gas engine is a modern generation electronic ignition. There are many useful functions built into the microprocessor of this unit. Supply Voltage Current Consumption In addition to the basic ignition functions, the unit has two FAIL-SAFE features. 1. After 90 seconds of inactivity it automatically switches to an inactive state.
45GX 10 58GX Part Number Description Part Number Description Part Number Description Part Number Description EVO30040101 EVO30040202 EVO30040204 EVO30040203 EVO30040301 EVO30040302 EVO30040303 EVO30940304 EVO30940305 EVO30040401 EVO30040402 EVO30040403 EVO30040404 EVO30040405 EVO30040406 EVO30040407 EVO30040701 EVO30040702 EVO30040801 EVO30040802 EVO30040901 EVO30040904 EVO30041001 Crankcase Front Bearing Packing Rear Bearing Rear Cover Rear Cover Screws Set Rear Cover O-Ring Pressure Nipple Pre
