Warranty
3
www.evolutionpowertools.com
EN
in the hinges or in any other of the
mechanisms included within the stand.
• When the stand is erected, all four (4)
of the hinge latching pins must be fully
engaged with the slots in the hinge
plates. This will ensure that the stand
remains rigid during cutting operations.
• All four legs must be set to the same
length. If the length of the legs is
adjusted, ensure that the inner leg
locking pins are fully engaged with the
relevant holes in the outer leg tube.
• Do not step or climb on the stand. Do
not use as a general purpose work stand
or work surface. Only collapse the stand
and prepare for storage after removal of
any attached chop saw.
• Conduct a safety check before every
work cycle. Check particularly that any
attached machine is securely fastened
to the stand, and that the stand legs are
correctly deployed and latched into their
service position.
• Do not withdraw the extension arms
beyond their safe working limits.
Extension arms and workpiece supports
are designed to aid the balance and
stability of a correctly positioned
workpiece. They are not designed to
support the full weight of a heavy or
long workpiece.
• A long or heavy workpiece may
need additional support. Specialist
workshop stands or sawhorses may
need to be employed to one or both
sides of the chop saw stand. Before
commencing cutting operations, adjust
all the workpiece supports to provide
maximum stability to the workpiece.
The Evolution Chop Saw Stand can
support 225 kg (496 lb) total weight (saw +
workpiece). Do not exceed this weight for
any reason.
SPECIAL FEATURES
• Large Universal Mounting Table will
accommodate most commercially
available chop saws.
• Lightweight but strong tubular and
sheet steel construction.
• Four (4) height adjustable, fold away
legs.
• Adjustable extension arms to both right
and left hand sides of the table.
• Height adjustable workpiece supports.
• Folds at for transportation and/or
storage.
• Carry Handle.
GETTING STARTED -UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking.
Remove the machine, together with the
accessories supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all
the accessories listed in this manual. Also
make sure that all the accessories are
complete. If any parts are found to be
missing, the machine and its accessories
should be returned together in their
original packaging to the retailer. Do not
throw the packaging away; keep it safe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible.
Do not let children play with empty plastic
bags due to the risk of suocation.
ITEMS SUPPLIED
Description Quantity
Instruction manual
x1
Main base unit with universal
mounting table
x1
Adjustable extension arms
x2
Height adjustable workpiece
supports bars
x2
Fixed clamps
x2
Adjustable clamps
x2
Carry handle
x1
Screw set
x1
Removable T-Handle
x2