Use and Care Manual

TABLE OF CONTENTS
Introduction 3
Warranty 3
Machine Specifications 4
Safety Labels & Symbols 5
Intended Use Of This Power Tool 5
Prohibited Use Of This Power Tool 5
Safety Precautions 6
Electrical Safety 6
Outdoor Use 6
General Power Tool Safety Instructions 6
Specific Safety Instructions 7
Blade Safety 9
Health Advice 9
Personal Protective Equipment (PPE) 9
Safe Operation 10
Perform Cuts Correctly & Safely 10
Additional Safety Advice 10
Getting Started 11
Unpacking 11
Serial No. / Batch Code 11
Additional Accessories 12
Items Supplied 13
Machine Overview 14
Assembly Diagrams 16
Saw Set Up Diagrams 18
Saw Usage Diagrams 20
Assembly & Preparation 22
Tools Needed 22
Unlatching & Raising
The Cutting Head
24
Installing The Blade 24
Checking & Adjusting 25
Bevel Angles 25
0˚ Bevel Stop Adjustment 25
0˚ Bevel Pointer Adjustment 25
45˚ Bevel Stop Adjustment 25
Machine Fence Alignment 26
The Depth Stop 26
Mitre Angle Pointer Adjustment 26
The Sliding Upper Fence Section 26
The Laser 27
Laser Safety 27
Laser Adjustment 28
Permanently Mounting The Mitre Saw 28
For Portable Use 29
Front Clamp 29
Operation Instructions 29
Body & Hand Positioning 29
On/Off Trigger Switch 29
Preparing To Make A Cut 30
Chop Cutting 30
Slide Cutting 30
Mitre Cutting 31
Bevel Cutting 31
Compound Cutting 31
Crown Moulding Cutting 32
Cutting Bowed Material 32
Clearing Jammed Material 32
Optional Evolution Accessories 32
Maintenance 33
Environmental Protection 33
Assembly Safety Checks 34
Final Safety Checks 34
EC Declaration of Conformity 35
2
www.evolutionpowertools.com