Instruction manual

5
1. Secure the engine mount on the airplane
firewall. Tighten the engine mount screws in
the firewall.
2. Install the engine on the engine mount
according to the airplane manufacturer’s
instructions.
WARNING: Tighten all engine mounting
screws before each flight. If you do not
tighten the engine mounting screws,
the screws may vibrate loose and cause
the engine to separate from the
fuselage.
Included Content
Engine
EVOA107 Evolution
®
/Spektrum
™
Telemetry RPM Adapter Cable
EVOA121 Sintered Plastic Filter Clunk
EVOG10300 Ignition Unit
EVOG10350 Spark Plug
EVOG20601B Muffler
EVO110E100A Muffler Screws & Gasket
Optional Items
APC15060 (APC16060) 15 x 6 propeller (break-in) (16 x 6 propeller (normal flight))
EVOA100 Optical Electronic Ignition Kill Switch
EVOA102 (EVOA103) Medium Gas-FKM Fuel Tubing 1 meter (3 meters)
EVOA112 Evolution 3 Wire Ignition/Receiver Switch
EVOX1001Q Evolution Synthetic 2-Cycle Oil
HAN155 Ultra Fuel Pump
HAN156 Tachometer
Installing the Engine
A
B
C
D
E
G
F
A. Spark Plug
B. Muffler
C. Low-speed Needle
D. Throttle Arm
E. Fuel Nipple
F. High-speed Needle
G. Crankcase Pressure Port