Instruction manual

8
5. HOW TO CHANGE THE FILTER
6. HOW
TO REPLACE THE BELT
(Unplug the machine before changing the belt)
When replacing the belt, always set the RUG/FLOOR Selector to the “FLOOR”
position.
 First unplug the vacuum
cleaner from the electrical
outlet. Remove the filter
with its stand from the
bottom of the paper bag
housing.
 Make sure that the filter is
in place before vacuuming.
 Wash the filter in clean
water and use again after
it is completely dry.
1. After removing the bottom plate, take off the belt cover.
belt
Belt guide
HEPA
Inlet air filter
HEPA stand