Instruction manual

3
www.evolutionsteel.com
E VO180
EC - DECLARATION OF CONFORMITY
We, manufacturer and importer
Evolution Power Tools Ltd.
Venture One
Shefeld
S20 3FR
Declare that the product
Part numbers:
Evolution: STEEL
Circular Saw 180mm
Complies with the essential requirements of the
following European Directives:
2006/42/EC – Machine Directive
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2002/95/EC – Restriction of the use of Certain
Hazardous Substances in Electrical and Electric
Equipment
Standards and Technical specications referred to:-
EN55014-1 : 2006
EN55014-2 : 1997+A1
EN61000-3-2 : 2006
EN61000-3-3 : 1995+A1+A2
EN60745-1 : 2003+A1
EN60745-2-5 : 2003
EN60825-1 : 1994+A1+A2
All documentation is held on le at the above
address and is available, on request for review.
Authorised Signatory
Name: Mr Matthew J Gavins
Position: Managing Director
Date: 1st June 2011
Please read these operating and safety instructions
carefully and completely. For your own safety,
before using this equipment check that the voltage
is correct and that all handles and parts are rmly
secured. If you are uncertain about any aspect of
using this equipment, please contact our Technical
Help Resource.
Technical Helpline UK 0870 609 2297
EVO 180MM STEEL CUTTING CIRCULAR SAW
Congratulations on your purchase of an Evolution
Power Tools machine. Please complete your
product registration on line to validate your
machine’s warranty period and ensure prompt
service if needed. We sincerely thank you for
selecting a product from Evolution Power Tools.
12 MONTH LIMITED WARRANTY.
Evolution power tools reserves the right to make
improvements and modications to design without
prior notice.
Evolution Power Tools will, within twelve (12) months
from the original date of purchase, repair or replace
any goods found to be defective in materials or
workmanship. This warranty is void if the tool being
returned has been used to cut materials beyond
the recommendations in the Instruction Manual or
if the saw has been damaged by accident, neglect,
or improper service. This warranty does not apply
to machines and/or components which have
been altered, changed, or modied in any way, or
subjected to use beyond recommended capacities
and specications. Electrical components are
subject to respective manufacturers’ warranties. All
goods returned defective shall be returned prepaid
freight to Evolution Power Tools. Evolution Power
Tools reserves the right to optionally repair or
replace it with the same or equivalent item. There
is no warranty – written or verbal – for saw blades.
In no event shall Evolution Power Tools be liable for
loss or damage resulting directly or indirectly from
the use of our merchandise or from any other cause.
Evolution Power Tools is not liable for any costs
incurred on such goods or consequential damages.
EC - DECLARATION OF CONFORMITY
GB
IMPORTANT INFORMATION
GB
12 MONTH LIMITED WARRANTY
GB