www.evolutionfury.com 210mm / 8-1/4” MITRE SAW Instruction Manual Read instructions before operating this tool. BO91000 www.evolutionfury.
PROJECT ® EC - DECLARATION OF CONFORMITY MAINTENANCE We, Evolution Power Tools Limited, Venture One, Longacre Close, Sheffield, S20 3FR as the supplier of the product listed below: FURY 210mm TCT Multi Purpose Compound Mitre Saw Part Number: FURY3B2102/ FURY3B2102EU Voltage: 110/230v Power: 1100W Declare, under our sole responsibility that the equipment to which this document relates, is in conformity with the following standards or other normative documents:EN61029-1:2000+A11+A12 EN61029-2-9:2002 EN608
PROJECT ® OPERATING INSTRUCTIONS DISCONNECT THE MITRE SAW AND INSPECT YOUR SAW BEFORE EACH USE. WARNING: To reduce the risk of injury, always unplug the saw before changing or adjusting anything. Compare the direction of rotation arrow on the guard to direction arrow on the blade. The blade teeth should always point downward at the front of the saw. Tighten the arbor screw. Tighten the cover plate screw.
PROJECT MACHINE SET-UP MOUNTING THE MITRE SAW WARNING: To reduce the risk of injury from unexpected saw movement, place the saw in the desired location either on a workbench or other recommended leg set. The base of the saw has four holes to mount the mitre saw. If the saw is to be used in one location, permanently fasten it to the workbench or leg set. 1. Tighten the mitre and bevel locks. 2. Place the saw so other people cannot stand behind it. Thrown debris could injure people in its path. 3.
