Use and Care Manual

EVOLVESTONE.COM

See Details #3, 4 and 5

Pro-Tip:

Open multiple boxes before installing to verify stone colors. If color varies, blend boxes

of stone together prior to installation. Stones should be installed in staggered lifts in the same

direction.

Pro-Tip:

Avoid installing the same size stone adjacent to one another if possible.

Pro-Tip:

Stagger stones to avoid long running vertical seams.

Pro-Tip:

Depending on the stone style selected, avoid long running horizontal seams.

Pro-Tip:

Tap the stones square with a hammer and ensure they are positioned in a level fashion.

Pro-Tip:

When a stone needs to be removed, use a small pry-bar to carefully remove the stone

from the substrate and snip the exposed nail flush with the back of the stone. No need to

remove the embedded portion of the fastener. These stones may be reapplied, but DO NOT CUT

THESE STONES.

Pro-Tip:

In the case of inside corners, install the more visible plane before moving on to the

adjacent wall. Bury your cut ends into the exposed substrate, then install the stones on the

adjacent wall.

2.5

Cutting Evolve Stones

When installing the stones, there will be instances where cuts are needed. To do so, first

measure the desired length and pick out a stone that is larger. Mark the desired dimension on

the stone and cut to the correct size.

Caution:

Contains trace amount of crystalline silica. Dust may create hazardous conditions.

Refer to OSHA cutting standards with regards to crystalline silica. Always wear a properly

fitted NIOSH approved N-95 series respirator when modifying or cutting.

Pro-Tip:

Mark the face of the stone after measuring, use a speed square to continue your mark

across the whole face of the stone. Lay the stones with the flat side facing downward, cutting

safely through the face.

Pro-Tip:

Texture the smooth cut surfaces by marring the surface with the use of a hammer

(waffle head hammers work great)

Pro-Tip:

In the case of highly visible cuts, clear exterior sealants such as Thompson’s Water-

Seal can be used to restore color vibrance.