User's Manual Manual

INSIO Version 1.0
–
User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
47
AUTOMATIC FUNCTIONS BUTTONS
Auto Save button: activates or de-activates the Auto Save mode related to the
automatic saving of the recorded clip, without pressing the Save button, as soon
as the Stop/Out button is pressed. Refer to section ‘Auto Save Mode’ on page 48.
Auto Transfer button: activates or de-activates the Auto Transfer mode related
to the automatic transfer of the recorded and saved clip without pressing the
Transfer button. Refer to section 6.3.1 ‘Automatic Transfer’ on page 72.
Auto Review button: activates or de-activates the Auto Review mode related to
the automatic loading of the recorded clip on the video playback channel selected
in the Review tab. Refer to section ‘Auto Review Mode’ on page 56.
On
e or several of these buttons can be activated at a time.
These functions can be activated or deactivated either in the Setup > User >
General > Default Auto actions section or in the Record window.
Note
These buttons are not present in the interface when the system is used
for streaming.
LIST OF CAMERAS AND CAMERA SELECTION AREA
The list of cameras displays the recorder channels seen as camera, as named in
Setup > User > Predefined Configurations > Record Setup. When cameras have
been grouped together, the camera view can be expanded by pressing the
button or collapsed by pressing the button.
The Camera Selection buttons allows the selection of some or all the cameras for
the recording of the take or, once the takes have been recorded, for the saving of
takes.
CLIP CREATION AND TRANSFER AREA
This area provides the buttons required to start, stop or abort the recording of a
take and buttons to save and transfer the recorded takes. The guardband
durations, as defined in Setup > System > General, are displayed at the top of
the Start and Stop buttons.
It also contains time information fields:
TC IN field: displays the timecode of the IN point for the linked clips being
recorded.
TC Dur field: displays the time interval between the IN and OUT points, i.e. clip
duration.
TC OUT field: displays the timecode of the OUT point for the recorded linked clips.
Note
Only the Start/In and the Stop/Out buttons are available when using the
stream mode.