User's Manual Manual

Issue 1.0.D INSIO Version 1.0
–
User Manual
EVS Broadcast Equipment – October 2009
66
Important
If the edited take is not the last recorded one, e.g. take 1 to 5 exist and
take 2 is edited, updated clips will be saved under take number 6.
Pay attention that there is no way to see on which original clips updated
clips are based.
5.5 ASSIGNING METADATA
The Metadata tab displays the user fields defined in Setup > User > Metadata. It
makes it possible to view and modify the metadata values related to the take.
You can enter metadata values once recording has started or modify them while
recording, or, later on, for a take selected in the left Clip List tab.
Metadata values entered for a clip are automatically assigned to all the clips from
the take.
5.6 VIEWING RECORD TRAINS
Record trains can be loaded on playback channels and viewed on the Video
Player, such as the recorded clips.
To load and view record trains, proceed as follows:
1.
Press the Administrative Tasks button in the upper left corner of the
Record/Review window.
The Administrative Tasks dialog box opens.
2. Press the View Input button. It becomes active:
3.
Press the Exit button to exit the window.