User's Manual User guide

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
138
The values initially shown in the dialogue box are either the
values for the first selected element or the default values
defined in the play-list settings. For more information on play-list
default settings please refer to “Default A/V Effect Parameters
fo
r Transitions” section on page 173.
Link video and audio parameters
If this option is checked, any change made to a video parameter
will also be made to the corresponding audio parameter and vice
versa.
In the case where parameters are linked if wipe is selected in
the ‘video’ zone, a mix is automatically selected in the ‘Audio’
zone.
Video Effect and Audio Effect zones
Cut The transition is defined as a cut (no effect)
Mix The transition is defined as a mix (dissolve
effect)
Wipe The transition is defined as a wipe effect. A wipe
type can be selected from the combo box.
Effect
duration
The combo box allows the selection of the
following items:
• Customize: a popup window is opened
asking the operator to enter a specific
value.
• Back to default: the duration is reset to the
default value defined in the default settings
• Three specific values: these values are
defined in the play-list settings in the Tools
menu area. Refer to the Predefined Effect
Du
ration section on page 175 for more
inf
ormation.