Handheld Garment Steamer KAGMTSTBSHA Steam Brush and Iron Combination Thank you for purchasing the Steam Brush and Iron Combination. Before using your Steam Brush and Iron Combination, please read the following safety instructions carefully. They are written to help you get the best performance out of the product and to use it correctly. After reading this manual, keep it in a safe place for future reference.
Risk of fire! Do NOT leave the appliance unsupervised when it is connected to mains power. Put the appliance into storage only when it has cooled down. Place the appliance on level and heat resistant surfaces only with the stand folded out. The appliance must be stood securely when it is put down Use only the ironing temperatures given in the care instructions, or those suitable for it. Otherwise, you could damage the textiles.
Intended Use This item can be used for ironing textiles as well as traditional irons. The extra tank, burst steam and more liable functioning choices will give you an entirely new experience compared to the experience of using a traditional iron. Easy packing, with a competitive price The main unit works with the creaser to deal with pant edges and bottoms, ties, collars, etc.
Before the First Use Remove the steam brush from the packaging. Remove all possible adhesive tags and protective foils from the steam iron. Attention! Plastic bags can be dangerous. To avoid fatalities through suffocation, keep plastic bags out of the reach of children and babies. Insert the power plug into a correctly installed and earthed mains power socket. Hold the steam brush horizontally.
The water hardness level can be queried at your local water works. Water Hardness Attention! Before refilling with water, ALWAYS remove the plug from the mains power Very soft/soft medium hard Very hard Ratio of distilled water to mains water 0 1:1 2:1 3:1 socket! There is a risk of electric shock! Pull out the filling water cover Fill the water with the measuring cup into the water tank until the water comes out. Push the cover back into the filler, pressing it hard with your thumb.
Creaser function operation Fix the creaser to the soleplate. It can be used for dealing with pant edges and the bottoms, ties, collars, etc. Attaching operation: Firstly, hold the handle with one hand, hold the lock of the creaser with the other hand, then make the lock aim at the keyhole on the soleplate. Push the lock into the keyhole. Detaching operation:Firstly, hold the handle with one hand, hold the lock of the creaser by your the other hand (press on the buttons with your thumb and forefinger).
Instruction for use Attach the appropriate accessory for the garment you wish to iron. Fill the appliance with water The temperature will be higher and higher with each clockwise rotation Plug in the Steam Brush and Iron Combination and check that the power light indicator is illuminated Wait for approximately one minute while the appliance heats up. Press the 'steam release' button.
Store the appliance in a dry, safe place Use only clean water. Using filtered, mineral or distilled water will prolong the appliance’s life. Tap water can also be used Never put detergent, chemicals, salt, perfume, dye or any other liquid except water into the water reservoir. Many of these substances are highly flammable and may cause bodily harm, while certain additives can corrode and clog the appliance’s components.