Use and Care Manual

Fig.5

Fig.6

Emptying the waste chamber & cleaning

The handheld unit is fitted with the dust chamber and filters in place, so to disassemble the unit

follow the instructions below to empty the waste chamber and clean the filters. The dust

chamber is removed by pressing the button on the underside of the dust chamber. This can now

be lifted and pulled away from the rest of the unit. When refitting the dust chamber, ensure the

base of the chamber is fitted under the ridge cover of the motor unit and then push down into

place. You should hear a “click” which means this is now secure.

To remove dust chamber from the handheld unit:

1. Press on the dust chamber release button.

2. Pull and lift the dust chamber away from the handheld unit.

To empty dust chamber:

1. Pull colored tab to remove micro filter.

2. Lift handle on metal filter and ensure the metal filter arrow is in the locked position.

3. The filter and cyclone assembly can then be removed and the dust chamber emptied.

Dust chamber

release button

Ridge around motor case

to hold chamber secure

Cloth micro filter

Metal filter

Motor cover

Cyclone container

Dust chamber