EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 1 Floor Scrubber & Polisher with Vac Model FP1000 Care and Use Instructions Earlex Inc 8261 Highway 73, Suite F, Stanley, N.C. 28164, USA Toll Free: 888-783-2612 Email: enquiries@ewbankusa.com Website: www.ewbankusa.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 2 Thank you for purchasing your Ewbank Floor Scrubber & Polisher with Vac, we hope you enjoy using it. ® Please read the manual carefully to get the most out of your product.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 3 Safety Instructions - CAUTION • DO NOT move the unit by pulling on the power cord. • DO NOT allow the unit to be used by children. • DO NOT modify the unit in any way - this is dangerous and will also invalidate the warranty. • DO NOT handle the unit with wet hands. WARNING! • This product is not a toy. • Always unplug the Ewbank® Floor Scrubber & Polisher with Vac when not in use. • To avoid electric shock, do not expose to rain or use outdoors.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 4 Safety Instructions - CAUTION • Ensure unit operation switch is off before plugging unit into a power socket-outlet. • If the power cord is damaged, it must be replaced by Ewbank® or its appointed agents to avoid a hazard. • It is recommended that an ALCI device is fitted into the mains supply socket-outlet for added protection against electric shock.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 5 Fig.3 Assembling the Appliance • Insert the handle into the aperture at the top of the body until the metal securing knob is located (Fig.3). • Polisher base can be removed from the appliance, press release clip (A) and pull straight out (Fig.2). Changing the pads and plates on your product • Make sure machine is not plugged in before fitting pads. • Note the orientation of the drive hubs (Fig.4).
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 6 Using your floor scrubber & polisher with Vac on various floor types Removing old polish Take care not to slip over when polishing floors, they can become very slippy in the process. Only use dedicated floor products; other inappropriate polishes and waxes may leave the floor dangerously slippy. • Use the white pads to scrub old polish from the floor. • Read and follow carefully the instructions for your chosen floor polish remover.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 7 Fig.9 Scrubbing /Cleaning the floor • Ensure that the scrubbing brushes are attached to the product (see page 5). • To turn the machine on, select setting II (scrubbing and vacuuming). • With your foot securing the head on the floor, pull the handle towards you and the machine will start (Fig.9). • Move the machine slowly across the surface of the floor to loosen and collect any debris.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 8 Cleaning and Maintenance Polishing the floor Cleaning the filters • Clean floor thoroughly first before adding your chosen floor wax polish. • With the dust container removed, you will have easy access to the filter and the filter holder. The cyclone cone can also be removed once the hinged bottom flap is open, and the dust container empty. • Allow to dry before buffing using blue polishing pads.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 9 • Smeary marks are made on floor when polishing - Has the polish/wax been allowed to dry? - Does old polish/wax need to be removed? Cleaning the floor pads • All pads and floor attachments are washable. • The brushes, polishing pads and scouring pads can be washed under the tap with warm soapy water. • No gloss sheen is being produced - Floor wax level may need to be increased, try another coat. Allow to dry and re-polish.
EB0491-FP1000-10.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 11 Mains Connection This unit is a Class II appliance which means it is double-insulated for your protection, no earthing wire is necessary. If the power cord is damaged, it must be replaced by Ewbank® Products or our appointed agents to avoid a hazard. If the fitted plug is cut off from the supply cord then the plug must be disposed of safely. If you are using an extension cord it must be rated at a minimum of 10 Amps and fully unwound.
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 12 Intertek 9901234 CONFORMS TO UL STD.1017 CERTIFIED TO CSA STD. C22.2 No.243-01 Your Warranty This product is guaranteed for a period of 12 months against faulty materials and workmanship. While every possible care is taken by Ewbank ® Products to ensure that our products leave the factory in good working order, Ewbank® Products cannot under any circumstances accept liability for problems or damage caused by their subsequent use.
