EW1051 - USB Smart Card Reader
| ENGLISH EW1051 USB Smart Card Reader Warnings and points of attention Opening of the product and/or products can lead to severe injuries! Repairing of the product should be done by qualified Ewent staff! Table of contents 1.0 Introduction .............................................................................................................. 2 1.1 Functions and features ........................................................................................ 2 1.2 Packing contents ...............
| ENGLISH 2.0 Installing the EW1051 using Windows 2000 and XP (Service Pack 1 & 2) When using Windows 2000 or Windows XP with Service Pack 1 or 2, you need to install the software supplied on CD-ROM. Use the following steps: 1. 2. 3. 4. 5. 6. 7. Make sure your computer is turned on and Windows is completely started. Insert the supplied CD-ROM in your computer’s CD-ROM or DVD-player. The wizard will start automatically. Choose you language and click ‘next’.
| ENGLISH 7. depending on the Operating System) The EW1051 is now ready to be used. 4.0 Using the EW1051 In order to use the EW1051, you need to use a smart card or an eID card and software which allows you to read from these types of cards. This software will be supplied by your bank, the government of your country or other certified instances. For example, people in Belgium can use http://www.cardreaders.be/nl/default.
| ENGLISH * Rates mentioned in this table do not include cell phone charges. 6.0 Frequently asked questions Q: A1: A2: My EW1051 is not recognized by my computer. What can I do about it? Try to use another USB port or use a powered USB hub. Contact the manufacturer of your computer for new software for the USB chipset. Q: When I install the software on the supplied CD-ROM, the ‘SimEdit’ software has also been installed. Is it necessary to use this software? No, it is not necessary.
| ENGLISH 8.0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e-mail message to: ewent@ewent-online.com. Clearly state ‘Declaration of Conformity’ and the article code of the product of which you would like to obtain a copy of the Declaration of Conformity.
