User's Manual

Ewig Industries Co Ltd Smoker thermometer

Prepared By: Tony Wu Dated: March 26, 2003

2. Press SMOKER-HI/HR or SMOKER-LO/MIN. The lower display will show a

small HI icon (or LO icon) and the set maximum (or minimum) temperature for the

smoker (automatically exit after 5 seconds)

3. Hold SMOKER-HI/HR (or SMOKER-LO/MIN) to enter setting mode (display

flashing)

4. Press SMOKER-HI/HR (or SMOKER-LO/MIN) repeatedly to set the desired

temperature (hold to fast forward)

5. Press MODE to confirm and return to normal mode

To show and set max food temperature

1. Press FOOD-HI/CLEAR. The upper display will show a small HI icon and the set

maximum temperature for the food (automatically exit after 5 seconds).

2. Hold FOOD-HI/CLEAR to enter setting mode (display flashing )

3. Press FOOD-HI/CLEAR repeatedly to set the desired temperature (hold to fast

forward)

4. Press MODE to confirm and return to normal mode

To turn on the temperature alarm

1. Press Alert/ START/STOP to activate the temperature alarms for Smoker and

Food. The alarm icons will be on at the upper and lower display.

2. For smoker cooking, insert the FOOD probe into the thickest part of the meat,

place meat in the smoker and close the door. Make sure the probe is not touching a

bone or any heavy fat areas.

3. The receiver will beep continuously, and the alarm icon and probe temperature

display will blink when one of the following conditions happens:

When the actual food temperature reached and exceeded the maximum FOOD set

temperature,

When the actual smoker temperature reached and exceeded the maximum

SMOKER set temperature, or fell below the minimum SMOKER set temperature.

Note: The SMOKER – LO alarm will not happen if the first temperature reading

is originally lower than the SMOKER set minimum temperature.

4. Press the Alert/ START/STOP to de-activate the alarm.

Using the Timer Function

The minimum setting for the timer is 1 minute, and the maximum setting is 24 hours.

Times less than 10 hours are displayed in hours/minutes; times greater than 10 hours

are displayed in hours.

Setting the Timer to Countdown Mode

1. Hold Light/MODE to select timer mode. The lower display will show a small

TIMER and 0:00

2. Press SMOKER-HI/HR and SMOKER-LO/MIN buttons to set the timer.

3. Press START/STOP button to begin the countdown (downward arrow and colon

will blink once each second)

4. When the countdown reaches 0:00, the receiver will beep for 30 seconds and begin

counting up (so you will know how much time has elapse since 0:00)

5. To stop the countdown process at any point, press the START/STOP button. The

downward arrow will stop blinking and become solid.