User's Manual

ManualsBrandsEwig Industries Macao Commercial Offshore ManualsElectronics433MHz RF Wireless Transmitter/LR Thermo Sensor

ACC211 User Manual - draft Page 1 of 9 issued: 15

March 2007 (A)

WIRELESS GRILL THERMOMETER

MODEL: TPR301

INSTRUCTION MANUAL

Congratulations on your purchase of the Wireless Grill Thermometer, a programmable wireless food

thermometer. You will now be able to remotely monitor the time and temperature of food cooking in the oven or

outdoors from anywhere in your home. The receiver unit will beep to alert you when the cooking temperature is

within the 10°F (5°C) range or already reaching the target temperature.

Receiver Features

LCD - Liquid crystal display to show display icons, Food-Taste, Timer, Received & Set temperatures. See LCD

diagram for detailed information.

CLIP – Detachable clip for attaching the receiver unit on a wrist belt or for resting on cradle.

BATTERY COMPARTMENT - Holds two (2) “AAA” 1.5V batteries.

Description of buttons

1. [HR/▲]

In Timer mode, press to set hour from 0hr to 23hr. Press and hold for 2 seconds; the hour setting will

increase at a faster rate.

In Thermometer mode, press to increase the manual temperature from 14ºF to 482ºC. Press and hold for 2

seconds, the temperature setting will increase at a faster rate.

LCD

CLIP

BATTERY COMPARTMENT

Summary of content (9 pages)

PAGE 1
WIRELESS GRILL THERMOMETER MODEL: TPR301 INSTRUCTION MANUAL Congratulations on your purchase of the Wireless Grill Thermometer, a programmable wireless food thermometer. You will now be able to remotely monitor the time and temperature of food cooking in the oven or outdoors from anywhere in your home. The receiver unit will beep to alert you when the cooking temperature is within the 10°F (5°C) range or already reaching the target temperature.
PAGE 2
. [MIN/▼] In Timer mode, press to set minutes from 0 min to 59 min. Press and hold for 2 seconds; the minute setting will increase at a faster rate. In Thermometer mode, press to decrease the manual temperature from 14ºF to 482ºC. Press and hold for 2 seconds; the temperature setting will decrease at a faster rate. 3. [CLEAR] While the timer count-down or count-up process is stopped, press once to clear the timer reading to zero.
PAGE 3
Timer mode (Count up /Count down) Count up Count down How to use the count up timer 1. Press [MODE] button to select the Timer mode, the timer icon ‘ ’ will appear. 2. In Timer mode and while the timer is stop running, press [CLEAR] button to reset the timer to 0:00. 3. While the timer display is 0:00, press [START/STOP] button will trigger timer to count up, the icon ‘ ’ will flash in 1Hz. Press [START/STOP] button again to temporarily stop the counting. 4.
PAGE 4
Thermometer mode Taste level Low battery indicator for receiver Meat type Low battery indicator for transmitter Pre-programmed Temperature Alert In Thermometer mode, this device will alert user when the probe temperature reached the pre-determined selective setting. The user firstly selects a meat type (e.g. Beef) and a taste level (e.g. WELL DONE). The pre-set temperature of 170ºF display automatically.
PAGE 5
Pre-Alert When the probe temperature is within 10°F (5°C) of the pre-set temperature, the device unit will beep once every 2 seconds and last for 1 minute. Reach Alert When the probe temperature reaches the pre-set temperature, the device unit will beep in pattern of bi-bi-bi/sec for 5 second, then silent for 5 second. This beeping pattern will repeat and last for10 minutes. Note: To stop the alert sound, press the [START/STOP] button.
PAGE 6
The user can use [▲] and [▼] button to enter a manual temperature other than the above pre-programmed temperature. When manual temperature is in use, the “PRE-SET” icon change to “MANUAL”. RF loss link indication The receiver unit normally works well in the 30 m / 98 ft. range (at sign) with the Transmitter unit.
PAGE 7
Transmitter Features BATTERY COMPARTMENT – holds 2 AAA batteries. Description of buttons 1. [TX] – transmit manually, terminates the auto registration process. Press and hold for 2 seconds to register the radio frequency with the receiver. 2. [On/Off] slide switch – ON - normal operation with full function. plug in for stainless steel OFF - turns transmitter off while not in use.
PAGE 8
5. Registration is complete when the Receiver receives the probe temperature and displays it in place of the flashing icon “- - -”. If the probe temperature does not appear in the receiver within 5-10 seconds, press and hold [MODE] button in the Receiver unit for 2 seconds to re-enter the RF registration mode. The icon ‘- -‘ will start to flash. Then press and hold [TX] button in the transmitter for 2 seconds to force it to send the registration code to the receiver.
PAGE 9
- Always wear a heat resistant glove to touch the stainless steel probe sensor or wire during or just after cooking. Do not touch with bare hands. - Keep the stainless steel probe sensor and wire away from children. - Wash the metal probe tip with hot soapy water and dry thoroughly. Do not immerse the probe in water while cleaning. - Wipe the transmitter and receiver with damp cloth. Do not immerse either in water.