Installation Guide

Part Design Pos. Description
Quan-
tity
Length
[mm]
135 Hinge 2
136 Sash lock 1
137 End cap for rectangular tube 2
*
138 T-seal
2
2
936
973
139 Phillips head screw 4,8 x 25 (for hinges) 4
140 Phillips head screw 4,8 x 16 (for hinges) 4
112 Phillips head screw 4,2 x 60 (for doors) 8
141 Phillips head screw 3,5 x 22 (sash lock) 2
142 Phillips head screw 4,2 x 50 (to attach square tube) 2
143 Glazing block 30 x 16 x 4 2
127 Plastic corner connector
2x left
2x right
Part design Pos. Description
Quan-
tity
Length
inches
see page 19/20 1
8
150 Door sets, 8-piece (Assembly see page 18.)
112 Phillips head screws 4,2 x 60 (door)
143 Glazing block 30 x 16 x 4
2
*
153 T-seal
2
2
966
973
135 Hinge 2
139 Phillips head screws 4,8 x 25 (hinges) 4
140 Phillips head screws 4,8 x 16 (hinges) 4
136 Sash Lock 1
141 Phillips head screws 3,5 x 22 (Sash Lock) 2
158 Door holder - black - 2 parts 1
159 Phillips head screws 3,5 x 16 (door holder) 4
127 Plastic corner connectors
1x left
1x right
9
Accessories bag for divided revolving door - at the bottom
Accessories bag for divided revolving door - top
*
Note:
The rubber seal is bundled in one bundle for all doors and windows. Cut accordingly please.