Use and Care Manual

Part design Pos. Description Quantity
100 Plastic corner connector 4
101 Straight connector plate
for cross bars above doors
4
102 T-connector slanted
for door upright and edge clamp
4
103 T-connector
door profi les to cross bars
8
104 T-connector slanted
vertical profi le middle/cross bar/
edge clamp
4
105 Floor profi le connectors
inside
4
107
Hexagon head screw
M6 x 16 + nuts M6
screws for feeding
160*
108 Washers (f. pos. 8)
to be used in the later support
connections
28
110 Insulation seal 6 - 8 thick
used on the inside
See table below.
111 Phillips head screws 4,2 x 13
for cross bar/roof beam- end cap/
cover plate
12
142 Phillips head screws 4,2 x 50
for cross bars in front and back walls
4
113 Phillips head screws 4,8 x 16
for fl oor profi le corner connectors
16
114 Roof beam - end cap/cover plate 2
115 Connector plate
for cross bars under windows
4/8/8
depends on type
116
Floor profi le corner con-
nector covers
4
117 Self drilling screws 3,5 x 13
t-connector 102 + 104
32
Length
Type
952 mm 571 mm
Riga XL IV 12 pc 4 pc
Riga XL V 14 pc 4 pc
Riga XL VI 16 pc 4 pc
5
Accessories bag basic construction
*plus substitute screws
Heavy insulation seal 6- 8 mm in pre cut section