Installation Guide

PRODUCT INFORMATION
Dear customer
Thank you for buying a high-quality aluminium greenhouse.
REMARKS
In all drawings you find the mounting-instructions for all
basic standard-models. However this manual should be a
sufficient guidance for all special-case greenhouses. This
greenhouse is designed for cultivation of plants/flowers.
Therefore leakage, water drops and condensation inside
the building are allowed. The building may only be entered
by competent persons during cultivation or maintenance.
Aluminium profiles that are not painted may show black
stains, these stains are not a production error: they can be
easily removed with a aluminium cleaner available at every
good drugstore. The rubber strips have been treated with
oil/silicone on the interior to facilitate the assembly. The
building should be mounted on a solid concrete foundation
deep enough to get a solid and frost-free ground. During
winter the roof has to be cleared of snow or supported in a
suitable way. The greenhouse should be built in a location
protected from strong winds. Protective gear (such as
protective gloves) should be used during mounting in order
to avoid injuries. One should at all times pay attention to
the local building regulations.
ASSEMBLY ORDER
The assembly procedure is the same for all our
greenhouses.
- Sorting of the profiles according the model.
- Mounting of the complete aluminium construction.
- Leveling of the construction using a waterlevel.
- Securing the building to the ground
- Glazing.
REQUIRED TOOLS
Socket wrench nr. 10 or spanner nr. 10, water-level,
screwdriver, drilling machine + drill 4.2 mm, scissors (to cut
the rubber).
We reserve the right to change the construction without
prior notice!