Installation Guide

ManualsBrandsExaco ManualsOutdoorsRoyal Victorian 12.5 ft. x 20 ft. Greenhouse

Page: H_42

OPTION: Spindle Manual Opener

Next, hold the lower U-shaped mount up

to the crossbar and mark the center of

one hole. Using a 1/8" drill bit, drill the

first hole, then screw the bracket on,

check for level - then mark and drill the

second hole. Slide the brass part of the

opener over the bolt in the window

channel. Use the supplied nylock nut to

secure the opener on the top mounting

bolt. Finally thread the large side bolts

into the U-shaped mount and the opener

is installed.

Installation Option 1:

Mount top of opener to

window with a screw

Installation Option 2: Insert a 1 inch long bolt

into lower roof window channel. Slide to the

center and lock it in place with a nut as

shown below.